9262d034bd
Port virtio-netd to driver-network
2024-02-27 14:07:17 +01:00
de6beb8992
Implement network:mac in all remaining network drivers
2024-02-26 20:48:02 +01:00
3751c915fe
Unify the scheme handling of all network drivers
...
This deduplicates a fair bit of non-trivial logic and makes it easier to
keep all network drivers in sync when the interface changes.
2024-02-26 20:43:41 +01:00
7b3e809573
Merge branch 'optimize_pcid_grants' into 'master'
...
Only do one memory:physical map per MCFG entry.
See merge request redox-os/drivers!139
2024-02-20 22:27:14 +00:00
e7a6bb6c81
Only do one memory:physical map per MCFG entry.
2024-02-20 22:27:14 +00:00
a2e9e28195
Fix build for 32-bit x86
2024-02-16 21:17:02 -07:00
c52e17dd46
Even more fixes for 32-bit x86
2024-02-16 21:00:13 -07:00
2c672a0568
More fixes for 32-bit x86
2024-02-16 20:58:54 -07:00
2a4e292e1d
virtio-core: mark CommonCfg as packed
2024-02-16 20:52:55 -07:00
de2fae8183
Do not compile MSI-X function for x86 32-bit
2024-02-16 20:52:37 -07:00
40e2189e22
ahcid: spin for all requests
2024-02-15 16:00:52 -07:00
74a64bf2bb
Merge branch 'fix-aarch64-build' into 'master'
...
ihdad, rtl8139d, rtl8168d, virtio-core, xhcid: Fix aarch64 build
See merge request redox-os/drivers!140
2024-02-10 17:21:04 +00:00
7439262994
ihdad, rtl8139d, rtl8168d, virtio-core, xhcid: Fix aarch64 build
2024-02-10 19:03:36 +01:00
c432f0fddf
Merge branch 'pci_interrupts_rework2' into 'master'
...
Various improvements to the MSI-X support
See merge request redox-os/drivers!138
2024-01-26 17:27:17 +00:00
67d3015e2e
Add helper for allocating a single MSI/MSI-X interrupt vector
...
It doesn't actually configure the device to emit it though, but does
make this easier to do.
2024-01-25 14:43:44 +01:00
9b809312c2
Ignore MSI-X PBA in all drivers
...
It isn't used in any driver and even on Linux no driver seems to use it
at all. The only times it seems to be useful are if you were to mask an
interrupt and want to check if the interrupt fired without unmasking or
if you want to make the device itself trigger an interrupt.
2024-01-24 14:28:40 +01:00
ecdcefba69
Clarify message_address argument names
2024-01-24 14:28:40 +01:00
f43aa8574c
Simplify MSI-X table pointer computation
2024-01-24 14:28:40 +01:00
7dbf22331b
Share msix config validation code
2024-01-24 14:28:40 +01:00
5f845538ea
Merge branch 'pci_interrupts_rework' into 'master'
...
Couple of interrupt handling cleanups and some other changes
See merge request redox-os/drivers!137
2024-01-24 13:21:24 +00:00
21add3ed09
Merge branch 'pci_use_pci_types2' into 'master'
...
Use the pci_types crate for writing the command register and reading the status register
See merge request redox-os/drivers!136
2024-01-24 13:19:46 +00:00
354c351b19
Unify device info printing between drivers
2024-01-23 13:01:40 +01:00
77b97bb2ed
Introduce PciBar::physmap_mem helper
2024-01-23 12:02:40 +01:00
4302a35a7e
Remove a couple of unused functions from MsixCapability
...
The set and write methods were useless as no rpc call is exposed by
pcid to actually write the new values. As for the rest, there were
no uses and they can be emulated using the other methods.
2024-01-22 20:44:17 +01:00
c13161c4a5
Fix nvmed
2024-01-22 19:57:24 +01:00
ad23ad5d93
Introduce irq_handle helper for legacy interrupts
2024-01-22 19:35:18 +01:00
bd6716efe4
Make legacy_interrupt_line an Option
...
Drivers don't need to know the exact legacy_interrupt_pin in use.
Just if legacy interrupts are enabled and if so which
legacy_interrupt_line is used.
2024-01-22 19:35:06 +01:00
e972047567
Use EndpointHeader methods for the command and status registers
2024-01-22 18:12:37 +01:00
623d12f276
Only try to load drivers for endpoint functions
...
For bridge functions we don't have any existing drivers and we
currently panic if we would try to load a driver for them.
2024-01-22 18:03:46 +01:00
545596f296
Don't try to fetch BARs unless there is a matching driver
...
Fetching BARs will temporarily invalidate them, which could cause
crashes if a driver happens to access it at the same time. As we
don't yet use a single pcid instance, we don't know which devices
have a driver attached or not. As such approximate this as the set
of devices for which the current pcid instance would load a driver.
2024-01-22 17:54:38 +01:00
f624ed92f7
Merge branch 'pci_use_pci_types' into 'master'
...
Start using the pci_types crate
See merge request redox-os/drivers!135
2024-01-22 16:12:54 +00:00
18529f6cee
Remove PciClass in favor of pci_types::DeviceType
2024-01-22 16:57:53 +01:00
fb0dcb384b
Use pci_types in a couple more places in PciHeader::from_reader
2024-01-22 16:48:52 +01:00
d2431d4140
Make all parsing in PciHeader::from_reader use pci_types
2024-01-22 16:32:18 +01:00
fda74cb359
Merge branch 'pci_cleanup2' into 'master'
...
Couple more pci cleanups
See merge request redox-os/drivers!134
2024-01-22 15:06:46 +00:00
a5d0c7c354
Use pci_types for reading BARs
...
This simplifies a lot of code and adds support for 64bit BARs.
2024-01-22 15:54:18 +01:00
d1b6009e3d
Start converting PciHeader::from_reader to pci_types
2024-01-22 15:25:08 +01:00
0b611dca04
Start using the pci_types crate
2024-01-22 11:25:43 +01:00
d56881de88
Use CfgAccess instead of ConfigReader in PciHeader::from_reader
...
This will enable getting BAR sizes directly inside this function in the future.
2024-01-22 11:00:17 +01:00
cc015eab13
Move PciHeader out of the pcid_interface crate
2024-01-21 21:25:50 +01:00
5192816de7
Introduce expect_port and expect_mem helpers
2024-01-21 21:12:24 +01:00
be0e6b9dd7
Pass self instead of &self to PciFeature methods
...
PciFeature is Copy, so passing it behind a reference is not necessary.
2024-01-21 20:46:00 +01:00
d0e90f5ded
Remove fetch_header from pcid_interface
...
Most things are already stored in SubdriverArguments and the couple of
things that aren't may change over time and thus should be read again
each time they are accessed, while fetch_header would receive a fixed
copy from pcid.
2024-01-21 19:35:39 +01:00
e5772c132b
Remove a lot of fields from PciHeader which are unlikely to be used
...
Some of these are removed with PCIe while many others only need to be
used by the firmware to initialize the PCI bridges. If we ever need
them anyway, we can always add them back, but for now it improves
readability.
2024-01-21 19:12:35 +01:00
1890293e86
Introduce a FullDeviceId type and pass it in pcid_interface
2024-01-21 15:18:56 +01:00
92914e808c
Reduce code indentation one level
2024-01-21 14:03:33 +01:00
b9c4c61dcc
Move driver matching to config.rs
2024-01-21 13:02:47 +01:00
92428c535b
Only enable redox scheme logger when compiling for redox
...
This allows running pcid tests on the host.
2024-01-21 11:35:06 +01:00
e2976d0f52
Merge branch 'pci_force_pcid_interface' into 'master'
...
Migrate all PCI drivers to pcid_interface
See merge request redox-os/drivers!133
2024-01-20 23:08:12 +00:00
a4acf55ad8
Merge branch 'pci_cleanup' into 'master'
...
Couple more pcid cleanups
See merge request redox-os/drivers!132
2024-01-20 23:07:34 +00:00
bjorn3