80d3affa1c
Enable xhci logging, powered by redox-log.
2020-04-19 14:45:46 +02:00
ae49a0ba30
Update chashmap version.
2020-04-19 14:45:46 +02:00
08616920d6
Get descriptor fetching working.
2020-04-19 14:45:46 +02:00
f3d2d3e2d1
Fix the IRQ reactor when doing subsequent cmds.
2020-04-19 14:45:46 +02:00
ddf71d48e6
Get the Enable Slot cmd working, asynchronously!
...
This is the first command that actually worked by calling the IRQ
reactor and then getting a response. While this may not be that much on
its own, it means the async/await model actually works in this context.
Now the major problem is getting rid of all the deadlocks, and later
remove block_on(future) in the Scheme impl, and instead go async with
future spawning instead.
2020-04-19 14:45:46 +02:00
e58245b280
Use an event queue in the IRQ reactor.
2020-04-19 14:45:46 +02:00
9e34ed3fbf
It compiles!
2020-04-19 14:45:46 +02:00
078a929bfc
Fix borrow checker errors, except SchemeMut::handle.
2020-04-19 14:45:46 +02:00
6791429cd2
Fix most high-level errors in xhcid.
2020-04-19 14:45:46 +02:00
bae238bbef
Asyncify Xhci::execute_transfer.
2020-04-19 14:45:46 +02:00
443b160b6d
Add internal locking to the Xhci struct.
2020-04-19 14:45:46 +02:00
cfc4d65d48
THE INTERRUPTS ARE GETTING GENERATED!
2020-04-19 14:45:46 +02:00
cb5a72fbc1
Successfully recognize (only one) MSI-X IRQ.
...
Somehow it only happens once though.
2020-04-19 14:45:46 +02:00
fa594155c9
Allow subdrivers to get the capability structs.
2020-04-19 14:45:46 +02:00
735c55f656
Rebase.
2020-04-19 14:45:46 +02:00
7536048ceb
Parse some of the PCI capabilities, and setup IPC.
2020-04-19 14:45:46 +02:00
bd860de51e
Temporarily disable qemu mouse integration
2020-04-18 11:24:05 -06:00
a24b73efcf
nvmed: Simplify init logging
2020-03-29 19:56:37 -06:00
2cac3cb752
nvmed: Fix partition offset check
2020-03-29 19:26:13 -06:00
a01f1c4c80
nvmed: fix block size conversion
2020-03-28 13:53:42 -06:00
4fd8664deb
pcid: Skip empty buses and devices
2020-03-28 13:35:50 -06:00
3dbf9ad3e7
Comment out XHCI interrupt message
2020-03-11 11:58:52 -06:00
f00a049439
Enable ahcid interrupts
2020-02-22 20:10:43 -07:00
c1b4292675
Improve ahcid interrupt handling
2020-02-22 19:46:28 -07:00
fc8cbe847b
Merge branch 'usb' into 'master'
...
Add a fully functioning USB SCSI block device driver.
See merge request redox-os/drivers!58
2020-02-21 17:13:39 +00:00
3203a33498
REDOXFS WORKS (read-only) ON USB!
2020-02-21 16:45:35 +01:00
4072d5d282
Implement READ CAPACITY 10.
...
This allows the block count and block size to be determined when no
block descriptors in the mode sense data are returned.
2020-02-18 19:18:20 +01:00
fab13d6404
Fix get_mode_sense10 and some bbb error handling.
2020-02-16 21:27:41 +01:00
3c9527206f
Add basic SCSI error handling.
2020-02-15 23:54:23 +01:00
4d14310e2d
Rustfmt.
2020-02-15 09:56:32 +01:00
20e5c02391
Use correct ioc and chain bits when creating trbs.
2020-02-15 09:55:36 +01:00
bd0892e45d
Make the usb scsi scheme able to do block I/O.
2020-02-15 00:26:19 +01:00
d44296dec9
Almost successfully read blocks using SCSI.
2020-02-14 18:38:24 +01:00
034e6bce70
Set up a basic SCSI scheme, and get disk size.
...
Some commands are unused though, and probably won't be used, for example
ReportSuppOpcodes. Also, there appears to be lots of different versions
of the SCSI specification.
2020-02-14 00:02:13 +01:00
9d88528188
Make SCSI commands working.
2020-02-12 23:17:50 +01:00
73ca576558
Use the real DCIs instead of driver-level numbers.
...
Sidenote: instead of STALLing because the driver didn't configure the
endpoints properly, regular transfers now work. Thus, QEMU was able to
recognize that it received a Bulk-Only Transport CBW. Yay!
Additionally, to make life easier when debugging, usbctl was added; now
it can get endpoint statuses which were previously non-accessible from
shell scripts, after the transition to the new ctl+data endpoint
interface.
2020-02-12 22:07:37 +01:00
56541efd13
Use correct endpoint indices.
2020-02-12 15:10:01 +01:00
1a7625c0bc
Allow stalled endpoints to be reset.
2020-02-12 13:46:28 +01:00
dd9124eb82
Simplify the endpoint interface.
2020-02-11 23:07:20 +01:00
127ef077c2
Select correct max packet sizes during init.
2020-02-11 12:54:34 +01:00
05392696fe
Use more correct params in configure_endpoint.
...
Most importantly in the endpoint contexts of the input context,
specifying the properties of the endpoints that are being configured.
2020-02-11 11:39:29 +01:00
d82ae0a5f6
Add periodic (driver interface-level) transfers.
2020-02-10 23:12:11 +01:00
d64cb02986
Allow (untested) usb device requests to send data.
2020-02-10 18:55:09 +01:00
e052c5968d
Support detecting USB port speeds.
2020-02-10 16:23:19 +01:00
cff3cf0d28
Add basic logic to usbscsid and support alternate interface.
2020-02-10 11:23:18 +01:00
62915fadb1
Implement stream transfers.
...
They only use one stream though, which defeats the purpose of streams,
but at least transfers now work.
2020-02-09 22:35:56 +01:00
6b70e80d20
Add (untested) transfer support.
2020-02-09 17:17:36 +01:00
ae76f57162
Prepare for orbital communication.
2020-02-09 11:12:18 +01:00
1013daf606
IT WORKS!
2020-02-08 17:18:09 +01:00
3fd4bc4b3b
Add functions for the HID-specific requests.
2020-02-08 12:28:17 +01:00
4lDO2