P6-e1000d-msi-migration.patch conflicts with P6-driver-main-fixes.patch
— both modify e1000d/src/main.rs at overlapping lines. The MSI migration
must be merged into P6-driver-main-fixes during the upcoming P6 rebase.
P6-e1000d-msi-migration.patch preserved in local/patches/base/ for reference.
e1000d was the last NIC driver using legacy IRQ (irq.irq_handle()).
Migrated to pci_allocate_interrupt_vector which tries MSI-X first,
then MSI, then falls back to legacy INTx — matching rtl8168d, rtl8139d,
ihdad, ihdgd, and nvmed.
63-line patch at local/patches/base/P6-e1000d-msi-migration.patch,
symlinked and wired into recipes/core/base/recipe.toml.
Base: fix P6-driver-new-modules.patch (ed format -> unified diff) for new
driver modules (ncq, itr, phy). P6-driver-main-fixes.patch now applies with
offset on current upstream source.
Relibc: remove stale P5-named-semaphores (upstream has stubs), add
P10-stack-size-8mb and P11-getrlimit-getrusage (per-process rlimit table,
sysconf integration, getdtablesize fix, null-pointer safety).
Kernel: consolidate 29 individual patches into single redbear-consolidated.patch.
Userutils: P5-redbear-branding replaces P4-login-rate-limit.
Recipe.toml changes now committed so they survive source resets.
MouseTx::handle() treated 0xFE (PS/2 RESEND) as an unknown response,
causing mouse init to fail on hardware where the mouse requests a
resend during the reset/command exchange. Now resends the current
command byte when the mouse returns 0xFE, matching the PS/2 protocol.
Bootloader hardcoded RedoxFS partition offset at 2 MiB, which fails when
efi_partition_size > 1 (redbear-full, redbear-grub use 16 MiB, placing
RedoxFS at LBA 34816 = 17 MiB). Added GPT partition table parser that
scans for Linux filesystem GUID (0FC63DAF) to find the actual offset.
Also removed invalid 'respawn = true' from 31_debug_console.service in
redbear-full.toml — init's service format does not support this field.
Verified: all three ISOs boot in QEMU UEFI and reach login prompt.
Add redbear-usb-storage-check in-guest binary that validates USB mass
storage read and write I/O: discovers /scheme/disk/ devices, writes a
test pattern to sector 2048, reads it back, verifies match, restores
original content. Updates test-usb-storage-qemu.sh with write-proof
verification step.
Includes all accumulated Red Bear OS work: kernel patches, relibc
patches, driver infrastructure, DRM/GPU, KDE recipes, firmware,
validation tooling, build system hardening, and documentation.
5-phase hardening to prevent silent file-layer collisions (the D-Bus
regression class):
Phase 1: lint-config-paths.sh + make lint-config in depends.mk
Phase 2: CollisionTracker in installer (content-hash comparison)
Phase 3: installs manifests in recipe.toml + validate-file-ownership.sh
Phase 4: validate-init-services.sh + make validate in disk.mk
Phase 5: documentation (AGENTS.md, BUILD-SYSTEM-HARDENING-PLAN.md)
Both redbear-mini and redbear-full build and validate clean.
66 declared install paths in base, zero conflicts.
P1 (ACPI/PCI/xHCI, 11 patches) and P5 (init hardening, 2 patches)
exist in local/patches/base/ but cannot be wired due to conflicts
from redox.patch removal. Documented with # TODO rebase notes
per PATCH-GOVERNANCE.md rules.
Fixed common dependency path (../../common → ../common).
Added workspace member entry for drivers/thermald.
thermald now builds as part of base recipe.
19/19 patches. base + base-initfs build.
P3-3: fbcond scrollback — captures last 1000 lines of text output
in ring buffer, exposes via read_scrollback(). Patch created but
needs line number adjustment for clean application.
P3-5: thermal daemon source created at drivers/thermald/. Reads
ACPI thermal zone temperature, logs warnings >65°C, errors >80°C.
Needs Cargo.toml workspace integration and recipe.toml BINS entry.
Part of COMPREHENSIVE-FIX-PLAN-FINAL P3 implementation.
Changed <policy user="root"> to <policy user="0"> in D-Bus
system.conf.in to avoid getpwnam lookup failures on Redox.
Patch written but does not apply yet — tar source extraction
puts files under dbus-1.16.2/ which requires strip=2 or different
path prefix. Left as documented work-in-progress.
D-Bus daemon runs despite cosmetic user lookup warnings.
Bootloader: alloc_zeroed_page_aligned no longer panics on OVMF
AllocatePages failure. Returns null on error.
Cookbook: pkgar falls back to repo/ dir when target pkgar missing.
Resolves KDE build chain failure.
redbear-full: builds 4.0GB image+ISO, boots without crash.
Boot process now includes:
- 25_serial_getty.service: getty on serial console (visible in QEMU -nographic)
- 29_activate_console.service: inputd -A 2 (activate VT2)
- 30_console.service: getty on VT2 (framebuffer console)
Fixed hunk counts (7→8, 8→9) for correct patch application.
Services use 'oneshot_async' type for fire-and-forget startup.
ZSH is the default shell for all user accounts (base.toml, mini, full, greeter).
P2-2: Login rate limiting (userutils/login.rs):
- Tracks consecutive failures, resets on success
- 3+ failures: exponential delay up to 30 seconds
- Applies to both password and blank-password login paths
P2-3: Network stack in initfs (base-initfs + service files):
- Added e1000d, rtl8168d to base-initfs BINS
- 60_smolnetd.service: network stack in initfs
- 61_dhcpd.service: DHCP client in initfs
- Network available before switch_root
Part of COMPREHENSIVE-FIX-AND-IMPROVEMENT-PLAN Phases P2.
Phase B1+B2 from BOOT-PROCESS-AUDIT:
- 45_usbscsid.service: USB mass storage driver in initfs (requires xhcid)
- 30_redox-drm.service: DRM/KMS display driver in initfs (requires hwd+pcid-spawner)
Both condition-architecture-gated to x86/x86_64.
Phase A1 from BOOT-PROCESS-AUDIT. The ACPI shutdown path now:
- Validates PM1a port is non-zero before writing
- Waits 3 seconds for power-off, then retries with PM1b+SLEEP_EN
- Falls back to keyboard controller reset (0x64=0xFE) on failure
- Handles SLP_TYPb correctly
- Removes fragile Pio::new()+write() without validation
logd now writes all log output to /var/log/system.log (5MB auto-rotation)
in addition to existing scheme listeners. Falls back to /tmp/logd-fallback.log
if /var/log is unavailable. Logs survive reboots for post-mortem analysis.
Part of Phase A2 (Boot Reliability) from BOOT-PROCESS-AUDIT-2026-05-03.
The 556MB monolithic redox.patch was impossible to manage, unreviewable,
blocked GitHub pushes, and could only grow. This commit:
- Moves all 64 absorbed patches from absorbed/ to active use in base/
- Removes the absorbed/ directory (consolidation history is now PATCH-HISTORY.md)
- Removes the redox.patch symlink from recipes/core/base/
- Fixes all recipe symlinks to point to active patches (not absorbed/)
- Patches are now individually wired, reviewable, and independently rebasable
The redox.patch mega-file is no longer needed — individual patches
are applied directly from the recipe.toml patches list.
Build system (src/cook/fetch.rs):
- Atomic patch application: applies patches to staging directory (cp -al),
atomically swaps on success, discards on failure — source tree is never
left in a partially-patched state
- normalize_patch(): strips diff --git/index/new-file-mode headers that the
build system's patch command does not recognize
- cleanup_workspace_pollution(): removes orphaned recipes/Cargo.toml and
recipes/Cargo.lock to prevent workspace conflicts
- Added --allow-protected CLI flag to repo binary
Input stack (local/patches/base/P3-*.patch):
- P3-ps2d-led-feedback: PS/2 LED state handling + InputProducer migration
- P3-inputd-keymap-bridge: InputProducer enum, keymap bridge query
- P3-usbhidd-hardening: HID descriptor validation, static lookup table,
8-button mouse support, transfer retry with exponential backoff
- P3-init-colored-output: ANSI-color coded init daemon output (green OK,
red FAILED, yellow SKIP/WARN)
XKB bridge (local/recipes/system/redbear-keymapd/source/src/xkb.rs):
- Parses X11 xkb/symbols/* format, maps XKB keycodes to PS/2 scancodes,
80+ X11 keysym names to Unicode, 4-level key support
Patch governance (local/patches/base/absorbed/README.md):
- Documents consolidation of P0-P3 patches into redox.patch
Finalize all non-artifact changes accumulated from other sessions:
- config updates, recipe changes, source edits, patches
- pkgar/cache artifacts intentionally excluded (build outputs)
This is the maximum achievable scope for this session.
Hardware-accelerated KDE blocked by: QML gate, KWin/Plasma builds,
hardware GPU validation — all require build system + physical GPU.
- Mesa recipe: re-add patches = ["P4-virgl-redox-disk-cache.patch"]
(was dropped from recipe during iteration)
- README.md: remove links to 4 deleted docs (COMPREHENSIVE-OS-ASSESSMENT,
RELIBC-COMPREHENSIVE, RELIBC-COMPLETENESS, DESKTOP-STACK-CURRENT-STATUS)
- Point to CONSOLE-TO-KDE v4.0 as the single canonical plan
Mesa now builds with -Dgallium-drivers=swrast,virgl for Redox target.
Fixes:
- CFLAGS: -Dstatic_assert(...)= nullifies Linux-drm.h static_assert
calls that conflict with Mesa util/macros.h redefinition on Redox
- virgl_screen.c: disk cache disabled for Redox (dl_iterate_phdr unavailable)
- bits/safamily-t.h: provided to cross-compiler toolchain sysroot
Build output:
- usr/lib/dri/virtio_gpu_dri.so — virgl DRI driver
- usr/lib/dri/swrast_dri.so — llvmpipe software renderer
- usr/lib/dri/kms_swrast_dri.so — KMS software renderer
- libEGL.so, libGLESv2.so, libgbm.so — with virgl support
- 80MB stage.pkgar (vs 63MB swrast-only)
This enables hardware-accelerated 3D rendering in QEMU via
-device virtio-vga-gl with virgl, using the virtio-gpu display
driver in redox-drm. The full stack for QEMU testing is now:
QEMU -device virtio-vga-gl
→ redox-drm virtio driver (KMS/GEM/pageflip)
→ Mesa virtio_gpu_dri.so (virgl gallium)
→ libEGL/libGLES2
→ Wayland compositor
→ KDE Plasma
Mesa now builds with -Dgallium-drivers=swrast,virgl for Redox target.
Fixes:
- virgl_screen.c: wrapped disk cache creation in #ifndef __redox__
(build_id_find_nhdr_for_addr uses dl_iterate_phdr — unavailable on Redox)
- bits/safamily-t.h: provided to cross-compiler toolchain sysroot
Durable patch:
- local/patches/mesa/P4-virgl-redox-disk-cache.patch (25 lines)
This enables hardware-accelerated 3D rendering in QEMU via
virtio-gpu + virgl. Mesa EGL/GLES2/GBM now support the virgl
gallium driver alongside llvmpipe software renderer.
63MB pkgar artifact with virgl support.
Platform prerequisite status:
- Qt6::Sensors: BUILT (v6.11.0, 520KB pkgar, dummy backend)
- libinput: BUILT (v1.30.2, with libevdev v1.13.2 + linux-input-headers)
- QML/Quick JIT: still disabled on Redox (blocks real KWin binary,
kirigami, plasma-framework)
KWin: now attempts real cmake build with Sensors + libinput deps
enabled. Falls back to redbear-compositor shim on cmake failure
(QML/Quick gate). Previously kwin was pure stub — now it's a
bounded build attempt with fallback.
Enabled in config (new this session):
- qt6-sensors, libevdev, libinput, kdecoration, kf6-kcmutils
Previously OOTB dependencies now resolved:
- libevdev → libinput → KWin real build path opened
- linux-input-headers → libevdev → libinput chain
- qt6-sensors → KWin Sensors dependency satisfied
vasilito