vasilito/RedBear-OS
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

build: purge stale 6.11.0 Qt source caches; gitignore local source.tar

Browse Source 
The 6.11.1 upgrade bumped recipe URLs+blake3 for the Qt modules but left stale
committed fetch-caches for three of them: qtdeclarative/qtwayland/qt6-sensors
shipped source.tar (and qt6-sensors a source/ extract) still at 6.11.0. repo
validates the cache against recipe blake3, so the stale 6.11.0 tar mismatched
the 6.11.1 pin -> "downloaded tar blake3 ... is not equal to blake3 in
recipe.toml" -> qtdeclarative cook failed, cascading Qt6Qml failures in every
downstream consumer (qtwayland, kf6-*), aborting the whole build.

Root cause of the committed caches: .gitignore only ignored recipes/**/source.tar
(mainline tree), never local/recipes/**/source.tar, so local fetch-caches were
committable and went stale on version bumps. Fixes:
  - git rm the stale 6.11.0 source.tar (x3) + qt6-sensors 6.11.0 source/ extract
    so the build re-fetches the pinned 6.11.1 tarballs.
  - .gitignore: ignore local/recipes/**/source.tar(.tmp) (fetch-cache; NOT
    source/, the durable fork model) so this cannot recur.
qtbase/qtshadertools/qtsvg were already correct (source.tar==6.11.1==pin).
This commit is contained in:
vasilito
2026-07-24 22:34:17 +09:00
parent 416565fe38
commit ca8f266f54
439 changed files with 8 additions and 105888 deletions
Download Patch File Download Diff File Expand all files Collapse all files
.gitignore
+8
View File
@@ -26,6 +26,14 @@ recipes/**/source-old
recipes/**/source.tar
recipes/**/source.tar.tmp
recipes/**/source.pre-preservation-test/
# A `source.tar` is ALWAYS the downloaded tarball fetch-cache (verified against
# recipe.toml's blake3), never durable code — unlike `source/` (the fork model).
# The `recipes/**` rules above only match the mainline recipes/ tree, so
# local/recipes/ tarball caches slipped through and got committed. They then went
# stale on version bumps (Qt 6.11.0 tars shadowing 6.11.1 URLs -> blake3
# mismatch, build failure). Ignoring the tarball (not source/) is safe.
local/recipes/**/source.tar
local/recipes/**/source.tar.tmp
local/recipes/archives/uutils-tar/source
local/recipes/dev/ninja-build/source
local/recipes/qt/qt6-sensors/source.tar
BIN
View File
Binary file not shown.
local/recipes/qt/qt6-sensors/source/.cmake.conf
-5
View File
@@ -1,5 +0,0 @@
set(QT_REPO_MODULE_VERSION "6.11.0")
set(QT_REPO_MODULE_PRERELEASE_VERSION_SEGMENT "alpha1")
set(QT_EXTRA_INTERNAL_TARGET_DEFINES "QT_NO_QASCONST=1")
list(APPEND QT_EXTRA_INTERNAL_TARGET_DEFINES "QT_NO_FOREACH=1")
list(APPEND QT_EXTRA_INTERNAL_TARGET_DEFINES "QT_NO_CONTEXTLESS_CONNECT=1")
local/recipes/qt/qt6-sensors/source/.gitreview
-4
View File
@@ -1,4 +0,0 @@
[gerrit]
host=codereview.qt-project.org
project=qt/qtsensors
defaultbranch=dev
local/recipes/qt/qt6-sensors/source/.tag
-1
View File
@@ -1 +0,0 @@
92ed021507d4f8c38e0e9548db97c8dd039829d9
local/recipes/qt/qt6-sensors/source/CMakeLists.txt
-27
View File
@@ -1,27 +0,0 @@
# Copyright (C) 2022 The Qt Company Ltd.
# SPDX-License-Identifier: BSD-3-Clause
cmake_minimum_required(VERSION 3.16)
include(.cmake.conf)
project(QtSensors
VERSION "${QT_REPO_MODULE_VERSION}"
DESCRIPTION "Qt Sensors Libraries"
HOMEPAGE_URL "https://qt.io/"
LANGUAGES CXX C
)
find_package(Qt6 ${PROJECT_VERSION} CONFIG REQUIRED COMPONENTS BuildInternals)
# This should be called as early as possible, just after find_package(BuildInternals) where it is
# defined.
qt_internal_project_setup()
find_package(Qt6 ${PROJECT_VERSION} CONFIG REQUIRED COMPONENTS Core)
find_package(Qt6 ${PROJECT_VERSION} CONFIG OPTIONAL_COMPONENTS
Xml Gui Widgets Quick Qml Svg DBus QuickTest
)
qt_build_repo()
local/recipes/qt/qt6-sensors/source/LICENSES/Apache-2.0.txt
-73
View File
@@ -1,73 +0,0 @@
Apache License
Version 2.0, January 2004
http://www.apache.org/licenses/
TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
1. Definitions.
"License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document.
"Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License.
"Legal Entity" shall mean the union of the acting entity and all other entities that control, are controlled by, or are under common control with that entity. For the purposes of this definition, "control" means (i) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii) beneficial ownership of such entity.
"You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this License.
"Source" form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files.
"Object" form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types.
"Work" shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below).
"Derivative Works" shall mean any work, whether in Source or Object form, that is based on (or derived from) the Work and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original work of authorship. For the purposes of this License, Derivative Works shall not include works that remain separable from, or merely link (or bind by name) to the interfaces of, the Work and Derivative Works thereof.
"Contribution" shall mean any work of authorship, including the original version of the Work and any modifications or additions to that Work or Derivative Works thereof, that is intentionally submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity authorized to submit on behalf of the copyright owner. For the purposes of this definition, "submitted" means any form of electronic, verbal, or written communication sent to the Licensor or its representatives, including but not limited to communication on electronic mailing lists, source code control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose of discussing and improving the Work, but excluding communication that is conspicuously marked or otherwise designated in writing by the copyright owner as "Not a Contribution."
"Contributor" shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been received by Licensor and subsequently incorporated within the Work.
2. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form.
3. Grant of Patent License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable (except as stated in this section) patent license to make, have made, use, offer to sell, sell, import, and otherwise transfer the Work, where such license applies only to those patent claims licensable by such Contributor that are necessarily infringed by their Contribution(s) alone or by combination of their Contribution(s) with the Work to which such Contribution(s) was submitted. If You institute patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed.
4. Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with or without modifications, and in Source or Object form, provided that You meet the following conditions:
(a) You must give any other recipients of the Work or Derivative Works a copy of this License; and
(b) You must cause any modified files to carry prominent notices stating that You changed the files; and
(c) You must retain, in the Source form of any Derivative Works that You distribute, all copyright, patent, trademark, and attribution notices from the Source form of the Work, excluding those notices that do not pertain to any part of the Derivative Works; and
(d) If the Work includes a "NOTICE" text file as part of its distribution, then any Derivative Works that You distribute must include a readable copy of the attribution notices contained within such NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in at least one of the following places: within a NOTICE text file distributed as part of the Derivative Works; within the Source form or documentation, if provided along with the Derivative Works; or, within a display generated by the Derivative Works, if and wherever such third-party notices normally appear. The contents of the NOTICE file are for informational purposes only and do not modify the License. You may add Your own attribution notices within Derivative Works that You distribute, alongside or as an addendum to the NOTICE text from the Work, provided that such additional attribution notices cannot be construed as modifying the License.
You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated in this License.
5. Submission of Contributions. Unless You explicitly state otherwise, any Contribution intentionally submitted for inclusion in the Work by You to the Licensor shall be under the terms and conditions of this License, without any additional terms or conditions. Notwithstanding the above, nothing herein shall supersede or modify the terms of any separate license agreement you may have executed with Licensor regarding such Contributions.
6. Trademarks. This License does not grant permission to use the trade names, trademarks, service marks, or product names of the Licensor, except as required for reasonable and customary use in describing the origin of the Work and reproducing the content of the NOTICE file.
7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.
8. Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall any Contributor be liable to You for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising as a result of this License or out of the use or inability to use the Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if such Contributor has been advised of the possibility of such damages.
9. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works thereof, You may choose to offer, and charge a fee for, acceptance of support, warranty, indemnity, or other liability obligations and/or rights consistent with this License. However, in accepting such obligations, You may act only on Your own behalf and on Your sole responsibility, not on behalf of any other Contributor, and only if You agree to indemnify, defend, and hold each Contributor harmless for any liability incurred by, or claims asserted against, such Contributor by reason of your accepting any such warranty or additional liability.
END OF TERMS AND CONDITIONS
APPENDIX: How to apply the Apache License to your work.
To apply the Apache License to your work, attach the following boilerplate notice, with the fields enclosed by brackets "[]" replaced with your own identifying information. (Don't include the brackets!) The text should be enclosed in the appropriate comment syntax for the file format. We also recommend that a file or class name and description of purpose be included on the same "printed page" as the copyright notice for easier identification within third-party archives.
Copyright [yyyy] [name of copyright owner]
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
local/recipes/qt/qt6-sensors/source/LICENSES/BSD-3-Clause.txt
-9
View File
@@ -1,9 +0,0 @@
Copyright (c) <year> <owner>.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3. Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
local/recipes/qt/qt6-sensors/source/LICENSES/GFDL-1.3-no-invariants-only.txt
-451
View File
@@ -1,451 +0,0 @@
GNU Free Documentation License
Version 1.3, 3 November 2008
Copyright (C) 2000, 2001, 2002, 2007, 2008 Free Software Foundation, Inc.
<https://fsf.org/>
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
0. PREAMBLE
The purpose of this License is to make a manual, textbook, or other
functional and useful document "free" in the sense of freedom: to
assure everyone the effective freedom to copy and redistribute it,
with or without modifying it, either commercially or noncommercially.
Secondarily, this License preserves for the author and publisher a way
to get credit for their work, while not being considered responsible
for modifications made by others.
This License is a kind of "copyleft", which means that derivative
works of the document must themselves be free in the same sense. It
complements the GNU General Public License, which is a copyleft
license designed for free software.
We have designed this License in order to use it for manuals for free
software, because free software needs free documentation: a free
program should come with manuals providing the same freedoms that the
software does. But this License is not limited to software manuals;
it can be used for any textual work, regardless of subject matter or
whether it is published as a printed book. We recommend this License
principally for works whose purpose is instruction or reference.
1. APPLICABILITY AND DEFINITIONS
This License applies to any manual or other work, in any medium, that
contains a notice placed by the copyright holder saying it can be
distributed under the terms of this License. Such a notice grants a
world-wide, royalty-free license, unlimited in duration, to use that
work under the conditions stated herein. The "Document", below,
refers to any such manual or work. Any member of the public is a
licensee, and is addressed as "you". You accept the license if you
copy, modify or distribute the work in a way requiring permission
under copyright law.
A "Modified Version" of the Document means any work containing the
Document or a portion of it, either copied verbatim, or with
modifications and/or translated into another language.
A "Secondary Section" is a named appendix or a front-matter section of
the Document that deals exclusively with the relationship of the
publishers or authors of the Document to the Document's overall
subject (or to related matters) and contains nothing that could fall
directly within that overall subject. (Thus, if the Document is in
part a textbook of mathematics, a Secondary Section may not explain
any mathematics.) The relationship could be a matter of historical
connection with the subject or with related matters, or of legal,
commercial, philosophical, ethical or political position regarding
them.
The "Invariant Sections" are certain Secondary Sections whose titles
are designated, as being those of Invariant Sections, in the notice
that says that the Document is released under this License. If a
section does not fit the above definition of Secondary then it is not
allowed to be designated as Invariant. The Document may contain zero
Invariant Sections. If the Document does not identify any Invariant
Sections then there are none.
The "Cover Texts" are certain short passages of text that are listed,
as Front-Cover Texts or Back-Cover Texts, in the notice that says that
the Document is released under this License. A Front-Cover Text may
be at most 5 words, and a Back-Cover Text may be at most 25 words.
A "Transparent" copy of the Document means a machine-readable copy,
represented in a format whose specification is available to the
general public, that is suitable for revising the document
straightforwardly with generic text editors or (for images composed of
pixels) generic paint programs or (for drawings) some widely available
drawing editor, and that is suitable for input to text formatters or
for automatic translation to a variety of formats suitable for input
to text formatters. A copy made in an otherwise Transparent file
format whose markup, or absence of markup, has been arranged to thwart
or discourage subsequent modification by readers is not Transparent.
An image format is not Transparent if used for any substantial amount
of text. A copy that is not "Transparent" is called "Opaque".
Examples of suitable formats for Transparent copies include plain
ASCII without markup, Texinfo input format, LaTeX input format, SGML
or XML using a publicly available DTD, and standard-conforming simple
HTML, PostScript or PDF designed for human modification. Examples of
transparent image formats include PNG, XCF and JPG. Opaque formats
include proprietary formats that can be read and edited only by
proprietary word processors, SGML or XML for which the DTD and/or
processing tools are not generally available, and the
machine-generated HTML, PostScript or PDF produced by some word
processors for output purposes only.
The "Title Page" means, for a printed book, the title page itself,
plus such following pages as are needed to hold, legibly, the material
this License requires to appear in the title page. For works in
formats which do not have any title page as such, "Title Page" means
the text near the most prominent appearance of the work's title,
preceding the beginning of the body of the text.
The "publisher" means any person or entity that distributes copies of
the Document to the public.
A section "Entitled XYZ" means a named subunit of the Document whose
title either is precisely XYZ or contains XYZ in parentheses following
text that translates XYZ in another language. (Here XYZ stands for a
specific section name mentioned below, such as "Acknowledgements",
"Dedications", "Endorsements", or "History".) To "Preserve the Title"
of such a section when you modify the Document means that it remains a
section "Entitled XYZ" according to this definition.
The Document may include Warranty Disclaimers next to the notice which
states that this License applies to the Document. These Warranty
Disclaimers are considered to be included by reference in this
License, but only as regards disclaiming warranties: any other
implication that these Warranty Disclaimers may have is void and has
no effect on the meaning of this License.
2. VERBATIM COPYING
You may copy and distribute the Document in any medium, either
commercially or noncommercially, provided that this License, the
copyright notices, and the license notice saying this License applies
to the Document are reproduced in all copies, and that you add no
other conditions whatsoever to those of this License. You may not use
technical measures to obstruct or control the reading or further
copying of the copies you make or distribute. However, you may accept
compensation in exchange for copies. If you distribute a large enough
number of copies you must also follow the conditions in section 3.
You may also lend copies, under the same conditions stated above, and
you may publicly display copies.
3. COPYING IN QUANTITY
If you publish printed copies (or copies in media that commonly have
printed covers) of the Document, numbering more than 100, and the
Document's license notice requires Cover Texts, you must enclose the
copies in covers that carry, clearly and legibly, all these Cover
Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on
the back cover. Both covers must also clearly and legibly identify
you as the publisher of these copies. The front cover must present
the full title with all words of the title equally prominent and
visible. You may add other material on the covers in addition.
Copying with changes limited to the covers, as long as they preserve
the title of the Document and satisfy these conditions, can be treated
as verbatim copying in other respects.
If the required texts for either cover are too voluminous to fit
legibly, you should put the first ones listed (as many as fit
reasonably) on the actual cover, and continue the rest onto adjacent
pages.
If you publish or distribute Opaque copies of the Document numbering
more than 100, you must either include a machine-readable Transparent
copy along with each Opaque copy, or state in or with each Opaque copy
a computer-network location from which the general network-using
public has access to download using public-standard network protocols
a complete Transparent copy of the Document, free of added material.
If you use the latter option, you must take reasonably prudent steps,
when you begin distribution of Opaque copies in quantity, to ensure
that this Transparent copy will remain thus accessible at the stated
location until at least one year after the last time you distribute an
Opaque copy (directly or through your agents or retailers) of that
edition to the public.
It is requested, but not required, that you contact the authors of the
Document well before redistributing any large number of copies, to
give them a chance to provide you with an updated version of the
Document.
4. MODIFICATIONS
You may copy and distribute a Modified Version of the Document under
the conditions of sections 2 and 3 above, provided that you release
the Modified Version under precisely this License, with the Modified
Version filling the role of the Document, thus licensing distribution
and modification of the Modified Version to whoever possesses a copy
of it. In addition, you must do these things in the Modified Version:
A. Use in the Title Page (and on the covers, if any) a title distinct
from that of the Document, and from those of previous versions
(which should, if there were any, be listed in the History section
of the Document). You may use the same title as a previous version
if the original publisher of that version gives permission.
B. List on the Title Page, as authors, one or more persons or entities
responsible for authorship of the modifications in the Modified
Version, together with at least five of the principal authors of the
Document (all of its principal authors, if it has fewer than five),
unless they release you from this requirement.
C. State on the Title page the name of the publisher of the
Modified Version, as the publisher.
D. Preserve all the copyright notices of the Document.
E. Add an appropriate copyright notice for your modifications
adjacent to the other copyright notices.
F. Include, immediately after the copyright notices, a license notice
giving the public permission to use the Modified Version under the
terms of this License, in the form shown in the Addendum below.
G. Preserve in that license notice the full lists of Invariant Sections
and required Cover Texts given in the Document's license notice.
H. Include an unaltered copy of this License.
I. Preserve the section Entitled "History", Preserve its Title, and add
to it an item stating at least the title, year, new authors, and
publisher of the Modified Version as given on the Title Page. If
there is no section Entitled "History" in the Document, create one
stating the title, year, authors, and publisher of the Document as
given on its Title Page, then add an item describing the Modified
Version as stated in the previous sentence.
J. Preserve the network location, if any, given in the Document for
public access to a Transparent copy of the Document, and likewise
the network locations given in the Document for previous versions
it was based on. These may be placed in the "History" section.
You may omit a network location for a work that was published at
least four years before the Document itself, or if the original
publisher of the version it refers to gives permission.
K. For any section Entitled "Acknowledgements" or "Dedications",
Preserve the Title of the section, and preserve in the section all
the substance and tone of each of the contributor acknowledgements
and/or dedications given therein.
L. Preserve all the Invariant Sections of the Document,
unaltered in their text and in their titles. Section numbers
or the equivalent are not considered part of the section titles.
M. Delete any section Entitled "Endorsements". Such a section
may not be included in the Modified Version.
N. Do not retitle any existing section to be Entitled "Endorsements"
or to conflict in title with any Invariant Section.
O. Preserve any Warranty Disclaimers.
If the Modified Version includes new front-matter sections or
appendices that qualify as Secondary Sections and contain no material
copied from the Document, you may at your option designate some or all
of these sections as invariant. To do this, add their titles to the
list of Invariant Sections in the Modified Version's license notice.
These titles must be distinct from any other section titles.
You may add a section Entitled "Endorsements", provided it contains
nothing but endorsements of your Modified Version by various
parties--for example, statements of peer review or that the text has
been approved by an organization as the authoritative definition of a
standard.
You may add a passage of up to five words as a Front-Cover Text, and a
passage of up to 25 words as a Back-Cover Text, to the end of the list
of Cover Texts in the Modified Version. Only one passage of
Front-Cover Text and one of Back-Cover Text may be added by (or
through arrangements made by) any one entity. If the Document already
includes a cover text for the same cover, previously added by you or
by arrangement made by the same entity you are acting on behalf of,
you may not add another; but you may replace the old one, on explicit
permission from the previous publisher that added the old one.
The author(s) and publisher(s) of the Document do not by this License
give permission to use their names for publicity for or to assert or
imply endorsement of any Modified Version.
5. COMBINING DOCUMENTS
You may combine the Document with other documents released under this
License, under the terms defined in section 4 above for modified
versions, provided that you include in the combination all of the
Invariant Sections of all of the original documents, unmodified, and
list them all as Invariant Sections of your combined work in its
license notice, and that you preserve all their Warranty Disclaimers.
The combined work need only contain one copy of this License, and
multiple identical Invariant Sections may be replaced with a single
copy. If there are multiple Invariant Sections with the same name but
different contents, make the title of each such section unique by
adding at the end of it, in parentheses, the name of the original
author or publisher of that section if known, or else a unique number.
Make the same adjustment to the section titles in the list of
Invariant Sections in the license notice of the combined work.
In the combination, you must combine any sections Entitled "History"
in the various original documents, forming one section Entitled
"History"; likewise combine any sections Entitled "Acknowledgements",
and any sections Entitled "Dedications". You must delete all sections
Entitled "Endorsements".
6. COLLECTIONS OF DOCUMENTS
You may make a collection consisting of the Document and other
documents released under this License, and replace the individual
copies of this License in the various documents with a single copy
that is included in the collection, provided that you follow the rules
of this License for verbatim copying of each of the documents in all
other respects.
You may extract a single document from such a collection, and
distribute it individually under this License, provided you insert a
copy of this License into the extracted document, and follow this
License in all other respects regarding verbatim copying of that
document.
7. AGGREGATION WITH INDEPENDENT WORKS
A compilation of the Document or its derivatives with other separate
and independent documents or works, in or on a volume of a storage or
distribution medium, is called an "aggregate" if the copyright
resulting from the compilation is not used to limit the legal rights
of the compilation's users beyond what the individual works permit.
When the Document is included in an aggregate, this License does not
apply to the other works in the aggregate which are not themselves
derivative works of the Document.
If the Cover Text requirement of section 3 is applicable to these
copies of the Document, then if the Document is less than one half of
the entire aggregate, the Document's Cover Texts may be placed on
covers that bracket the Document within the aggregate, or the
electronic equivalent of covers if the Document is in electronic form.
Otherwise they must appear on printed covers that bracket the whole
aggregate.
8. TRANSLATION
Translation is considered a kind of modification, so you may
distribute translations of the Document under the terms of section 4.
Replacing Invariant Sections with translations requires special
permission from their copyright holders, but you may include
translations of some or all Invariant Sections in addition to the
original versions of these Invariant Sections. You may include a
translation of this License, and all the license notices in the
Document, and any Warranty Disclaimers, provided that you also include
the original English version of this License and the original versions
of those notices and disclaimers. In case of a disagreement between
the translation and the original version of this License or a notice
or disclaimer, the original version will prevail.
If a section in the Document is Entitled "Acknowledgements",
"Dedications", or "History", the requirement (section 4) to Preserve
its Title (section 1) will typically require changing the actual
title.
9. TERMINATION
You may not copy, modify, sublicense, or distribute the Document
except as expressly provided under this License. Any attempt
otherwise to copy, modify, sublicense, or distribute it is void, and
will automatically terminate your rights under this License.
However, if you cease all violation of this License, then your license
from a particular copyright holder is reinstated (a) provisionally,
unless and until the copyright holder explicitly and finally
terminates your license, and (b) permanently, if the copyright holder
fails to notify you of the violation by some reasonable means prior to
60 days after the cessation.
Moreover, your license from a particular copyright holder is
reinstated permanently if the copyright holder notifies you of the
violation by some reasonable means, this is the first time you have
received notice of violation of this License (for any work) from that
copyright holder, and you cure the violation prior to 30 days after
your receipt of the notice.
Termination of your rights under this section does not terminate the
licenses of parties who have received copies or rights from you under
this License. If your rights have been terminated and not permanently
reinstated, receipt of a copy of some or all of the same material does
not give you any rights to use it.
10. FUTURE REVISIONS OF THIS LICENSE
The Free Software Foundation may publish new, revised versions of the
GNU Free Documentation License from time to time. Such new versions
will be similar in spirit to the present version, but may differ in
detail to address new problems or concerns. See
https://www.gnu.org/licenses/.
Each version of the License is given a distinguishing version number.
If the Document specifies that a particular numbered version of this
License "or any later version" applies to it, you have the option of
following the terms and conditions either of that specified version or
of any later version that has been published (not as a draft) by the
Free Software Foundation. If the Document does not specify a version
number of this License, you may choose any version ever published (not
as a draft) by the Free Software Foundation. If the Document
specifies that a proxy can decide which future versions of this
License can be used, that proxy's public statement of acceptance of a
version permanently authorizes you to choose that version for the
Document.
11. RELICENSING
"Massive Multiauthor Collaboration Site" (or "MMC Site") means any
World Wide Web server that publishes copyrightable works and also
provides prominent facilities for anybody to edit those works. A
public wiki that anybody can edit is an example of such a server. A
"Massive Multiauthor Collaboration" (or "MMC") contained in the site
means any set of copyrightable works thus published on the MMC site.
"CC-BY-SA" means the Creative Commons Attribution-Share Alike 3.0
license published by Creative Commons Corporation, a not-for-profit
corporation with a principal place of business in San Francisco,
California, as well as future copyleft versions of that license
published by that same organization.
"Incorporate" means to publish or republish a Document, in whole or in
part, as part of another Document.
An MMC is "eligible for relicensing" if it is licensed under this
License, and if all works that were first published under this License
somewhere other than this MMC, and subsequently incorporated in whole or
in part into the MMC, (1) had no cover texts or invariant sections, and
(2) were thus incorporated prior to November 1, 2008.
The operator of an MMC Site may republish an MMC contained in the site
under CC-BY-SA on the same site at any time before August 1, 2009,
provided the MMC is eligible for relicensing.
ADDENDUM: How to use this License for your documents
To use this License in a document you have written, include a copy of
the License in the document and put the following copyright and
license notices just after the title page:
Copyright (c) YEAR YOUR NAME.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3
or any later version published by the Free Software Foundation;
with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts.
A copy of the license is included in the section entitled "GNU
Free Documentation License".
If you have Invariant Sections, Front-Cover Texts and Back-Cover Texts,
replace the "with...Texts." line with this:
with the Invariant Sections being LIST THEIR TITLES, with the
Front-Cover Texts being LIST, and with the Back-Cover Texts being LIST.
If you have Invariant Sections without Cover Texts, or some other
combination of the three, merge those two alternatives to suit the
situation.
If your document contains nontrivial examples of program code, we
recommend releasing these examples in parallel under your choice of
free software license, such as the GNU General Public License,
to permit their use in free software.
local/recipes/qt/qt6-sensors/source/LICENSES/GPL-2.0-only.txt
-339
View File
@@ -1,339 +0,0 @@
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your
freedom to share and change it. By contrast, the GNU General Public
License is intended to guarantee your freedom to share and change free
software--to make sure the software is free for all its users. This
General Public License applies to most of the Free Software
Foundation's software and to any other program whose authors commit to
using it. (Some other Free Software Foundation software is covered by
the GNU Lesser General Public License instead.) You can apply it to
your programs, too.
When we speak of free software, we are referring to freedom, not
price. Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
this service if you wish), that you receive source code or can get it
if you want it, that you can change the software or use pieces of it
in new free programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid
anyone to deny you these rights or to ask you to surrender the rights.
These restrictions translate to certain responsibilities for you if you
distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether
gratis or for a fee, you must give the recipients all the rights that
you have. You must make sure that they, too, receive or can get the
source code. And you must show them these terms so they know their
rights.
We protect your rights with two steps: (1) copyright the software, and
(2) offer you this license which gives you legal permission to copy,
distribute and/or modify the software.
Also, for each author's protection and ours, we want to make certain
that everyone understands that there is no warranty for this free
software. If the software is modified by someone else and passed on, we
want its recipients to know that what they have is not the original, so
that any problems introduced by others will not reflect on the original
authors' reputations.
Finally, any free program is threatened constantly by software
patents. We wish to avoid the danger that redistributors of a free
program will individually obtain patent licenses, in effect making the
program proprietary. To prevent this, we have made it clear that any
patent must be licensed for everyone's free use or not licensed at all.
The precise terms and conditions for copying, distribution and
modification follow.
GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains
a notice placed by the copyright holder saying it may be distributed
under the terms of this General Public License. The "Program", below,
refers to any such program or work, and a "work based on the Program"
means either the Program or any derivative work under copyright law:
that is to say, a work containing the Program or a portion of it,
either verbatim or with modifications and/or translated into another
language. (Hereinafter, translation is included without limitation in
the term "modification".) Each licensee is addressed as "you".
Activities other than copying, distribution and modification are not
covered by this License; they are outside its scope. The act of
running the Program is not restricted, and the output from the Program
is covered only if its contents constitute a work based on the
Program (independent of having been made by running the Program).
Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program's
source code as you receive it, in any medium, provided that you
conspicuously and appropriately publish on each copy an appropriate
copyright notice and disclaimer of warranty; keep intact all the
notices that refer to this License and to the absence of any warranty;
and give any other recipients of the Program a copy of this License
along with the Program.
You may charge a fee for the physical act of transferring a copy, and
you may at your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion
of it, thus forming a work based on the Program, and copy and
distribute such modifications or work under the terms of Section 1
above, provided that you also meet all of these conditions:
a) You must cause the modified files to carry prominent notices
stating that you changed the files and the date of any change.
b) You must cause any work that you distribute or publish, that in
whole or in part contains or is derived from the Program or any
part thereof, to be licensed as a whole at no charge to all third
parties under the terms of this License.
c) If the modified program normally reads commands interactively
when run, you must cause it, when started running for such
interactive use in the most ordinary way, to print or display an
announcement including an appropriate copyright notice and a
notice that there is no warranty (or else, saying that you provide
a warranty) and that users may redistribute the program under
these conditions, and telling the user how to view a copy of this
License. (Exception: if the Program itself is interactive but
does not normally print such an announcement, your work based on
the Program is not required to print an announcement.)
These requirements apply to the modified work as a whole. If
identifiable sections of that work are not derived from the Program,
and can be reasonably considered independent and separate works in
themselves, then this License, and its terms, do not apply to those
sections when you distribute them as separate works. But when you
distribute the same sections as part of a whole which is a work based
on the Program, the distribution of the whole must be on the terms of
this License, whose permissions for other licensees extend to the
entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest
your rights to work written entirely by you; rather, the intent is to
exercise the right to control the distribution of derivative or
collective works based on the Program.
In addition, mere aggregation of another work not based on the Program
with the Program (or with a work based on the Program) on a volume of
a storage or distribution medium does not bring the other work under
the scope of this License.
3. You may copy and distribute the Program (or a work based on it,
under Section 2) in object code or executable form under the terms of
Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable
source code, which must be distributed under the terms of Sections
1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three
years, to give any third party, for a charge no more than your
cost of physically performing source distribution, a complete
machine-readable copy of the corresponding source code, to be
distributed under the terms of Sections 1 and 2 above on a medium
customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer
to distribute corresponding source code. (This alternative is
allowed only for noncommercial distribution and only if you
received the program in object code or executable form with such
an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for
making modifications to it. For an executable work, complete source
code means all the source code for all modules it contains, plus any
associated interface definition files, plus the scripts used to
control compilation and installation of the executable. However, as a
special exception, the source code distributed need not include
anything that is normally distributed (in either source or binary
form) with the major components (compiler, kernel, and so on) of the
operating system on which the executable runs, unless that component
itself accompanies the executable.
If distribution of executable or object code is made by offering
access to copy from a designated place, then offering equivalent
access to copy the source code from the same place counts as
distribution of the source code, even though third parties are not
compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program
except as expressly provided under this License. Any attempt
otherwise to copy, modify, sublicense or distribute the Program is
void, and will automatically terminate your rights under this License.
However, parties who have received copies, or rights, from you under
this License will not have their licenses terminated so long as such
parties remain in full compliance.
5. You are not required to accept this License, since you have not
signed it. However, nothing else grants you permission to modify or
distribute the Program or its derivative works. These actions are
prohibited by law if you do not accept this License. Therefore, by
modifying or distributing the Program (or any work based on the
Program), you indicate your acceptance of this License to do so, and
all its terms and conditions for copying, distributing or modifying
the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the
Program), the recipient automatically receives a license from the
original licensor to copy, distribute or modify the Program subject to
these terms and conditions. You may not impose any further
restrictions on the recipients' exercise of the rights granted herein.
You are not responsible for enforcing compliance by third parties to
this License.
7. If, as a consequence of a court judgment or allegation of patent
infringement or for any other reason (not limited to patent issues),
conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License. If you cannot
distribute so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you
may not distribute the Program at all. For example, if a patent
license would not permit royalty-free redistribution of the Program by
all those who receive copies directly or indirectly through you, then
the only way you could satisfy both it and this License would be to
refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under
any particular circumstance, the balance of the section is intended to
apply and the section as a whole is intended to apply in other
circumstances.
It is not the purpose of this section to induce you to infringe any
patents or other property right claims or to contest validity of any
such claims; this section has the sole purpose of protecting the
integrity of the free software distribution system, which is
implemented by public license practices. Many people have made
generous contributions to the wide range of software distributed
through that system in reliance on consistent application of that
system; it is up to the author/donor to decide if he or she is willing
to distribute software through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear what is believed to
be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in
certain countries either by patents or by copyrighted interfaces, the
original copyright holder who places the Program under this License
may add an explicit geographical distribution limitation excluding
those countries, so that distribution is permitted only in or among
countries not thus excluded. In such case, this License incorporates
the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions
of the General Public License from time to time. Such new versions will
be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.
Each version is given a distinguishing version number. If the Program
specifies a version number of this License which applies to it and "any
later version", you have the option of following the terms and conditions
either of that version or of any later version published by the Free
Software Foundation. If the Program does not specify a version number of
this License, you may choose any version ever published by the Free Software
Foundation.
10. If you wish to incorporate parts of the Program into other free
programs whose distribution conditions are different, write to the author
to ask for permission. For software which is copyrighted by the Free
Software Foundation, write to the Free Software Foundation; we sometimes
make exceptions for this. Our decision will be guided by the two goals
of preserving the free status of all derivatives of our free software and
of promoting the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest
to attach them to the start of each source file to most effectively
convey the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.
<one line to give the program's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License along
with this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this
when it starts in an interactive mode:
Gnomovision version 69, Copyright (C) year name of author
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
This is free software, and you are welcome to redistribute it
under certain conditions; type `show c' for details.
The hypothetical commands `show w' and `show c' should show the appropriate
parts of the General Public License. Of course, the commands you use may
be called something other than `show w' and `show c'; they could even be
mouse-clicks or menu items--whatever suits your program.
You should also get your employer (if you work as a programmer) or your
school, if any, to sign a "copyright disclaimer" for the program, if
necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the program
`Gnomovision' (which makes passes at compilers) written by James Hacker.
<signature of Ty Coon>, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating your program into
proprietary programs. If your program is a subroutine library, you may
consider it more useful to permit linking proprietary applications with the
library. If this is what you want to do, use the GNU Lesser General
Public License instead of this License.
local/recipes/qt/qt6-sensors/source/LICENSES/GPL-3.0-only.txt
-674
View File
@@ -1,674 +0,0 @@
GNU GENERAL PUBLIC LICENSE
Version 3, 29 June 2007
Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble
The GNU General Public License is a free, copyleft license for
software and other kinds of works.
The licenses for most software and other practical works are designed
to take away your freedom to share and change the works. By contrast,
the GNU General Public License is intended to guarantee your freedom to
share and change all versions of a program--to make sure it remains free
software for all its users. We, the Free Software Foundation, use the
GNU General Public License for most of our software; it applies also to
any other work released this way by its authors. You can apply it to
your programs, too.
When we speak of free software, we are referring to freedom, not
price. Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
them if you wish), that you receive source code or can get it if you
want it, that you can change the software or use pieces of it in new
free programs, and that you know you can do these things.
To protect your rights, we need to prevent others from denying you
these rights or asking you to surrender the rights. Therefore, you have
certain responsibilities if you distribute copies of the software, or if
you modify it: responsibilities to respect the freedom of others.
For example, if you distribute copies of such a program, whether
gratis or for a fee, you must pass on to the recipients the same
freedoms that you received. You must make sure that they, too, receive
or can get the source code. And you must show them these terms so they
know their rights.
Developers that use the GNU GPL protect your rights with two steps:
(1) assert copyright on the software, and (2) offer you this License
giving you legal permission to copy, distribute and/or modify it.
For the developers' and authors' protection, the GPL clearly explains
that there is no warranty for this free software. For both users' and
authors' sake, the GPL requires that modified versions be marked as
changed, so that their problems will not be attributed erroneously to
authors of previous versions.
Some devices are designed to deny users access to install or run
modified versions of the software inside them, although the manufacturer
can do so. This is fundamentally incompatible with the aim of
protecting users' freedom to change the software. The systematic
pattern of such abuse occurs in the area of products for individuals to
use, which is precisely where it is most unacceptable. Therefore, we
have designed this version of the GPL to prohibit the practice for those
products. If such problems arise substantially in other domains, we
stand ready to extend this provision to those domains in future versions
of the GPL, as needed to protect the freedom of users.
Finally, every program is threatened constantly by software patents.
States should not allow patents to restrict development and use of
software on general-purpose computers, but in those that do, we wish to
avoid the special danger that patents applied to a free program could
make it effectively proprietary. To prevent this, the GPL assures that
patents cannot be used to render the program non-free.
The precise terms and conditions for copying, distribution and
modification follow.
TERMS AND CONDITIONS
0. Definitions.
"This License" refers to version 3 of the GNU General Public License.
"Copyright" also means copyright-like laws that apply to other kinds of
works, such as semiconductor masks.
"The Program" refers to any copyrightable work licensed under this
License. Each licensee is addressed as "you". "Licensees" and
"recipients" may be individuals or organizations.
To "modify" a work means to copy from or adapt all or part of the work
in a fashion requiring copyright permission, other than the making of an
exact copy. The resulting work is called a "modified version" of the
earlier work or a work "based on" the earlier work.
A "covered work" means either the unmodified Program or a work based
on the Program.
To "propagate" a work means to do anything with it that, without
permission, would make you directly or secondarily liable for
infringement under applicable copyright law, except executing it on a
computer or modifying a private copy. Propagation includes copying,
distribution (with or without modification), making available to the
public, and in some countries other activities as well.
To "convey" a work means any kind of propagation that enables other
parties to make or receive copies. Mere interaction with a user through
a computer network, with no transfer of a copy, is not conveying.
An interactive user interface displays "Appropriate Legal Notices"
to the extent that it includes a convenient and prominently visible
feature that (1) displays an appropriate copyright notice, and (2)
tells the user that there is no warranty for the work (except to the
extent that warranties are provided), that licensees may convey the
work under this License, and how to view a copy of this License. If
the interface presents a list of user commands or options, such as a
menu, a prominent item in the list meets this criterion.
1. Source Code.
The "source code" for a work means the preferred form of the work
for making modifications to it. "Object code" means any non-source
form of a work.
A "Standard Interface" means an interface that either is an official
standard defined by a recognized standards body, or, in the case of
interfaces specified for a particular programming language, one that
is widely used among developers working in that language.
The "System Libraries" of an executable work include anything, other
than the work as a whole, that (a) is included in the normal form of
packaging a Major Component, but which is not part of that Major
Component, and (b) serves only to enable use of the work with that
Major Component, or to implement a Standard Interface for which an
implementation is available to the public in source code form. A
"Major Component", in this context, means a major essential component
(kernel, window system, and so on) of the specific operating system
(if any) on which the executable work runs, or a compiler used to
produce the work, or an object code interpreter used to run it.
The "Corresponding Source" for a work in object code form means all
the source code needed to generate, install, and (for an executable
work) run the object code and to modify the work, including scripts to
control those activities. However, it does not include the work's
System Libraries, or general-purpose tools or generally available free
programs which are used unmodified in performing those activities but
which are not part of the work. For example, Corresponding Source
includes interface definition files associated with source files for
the work, and the source code for shared libraries and dynamically
linked subprograms that the work is specifically designed to require,
such as by intimate data communication or control flow between those
subprograms and other parts of the work.
The Corresponding Source need not include anything that users
can regenerate automatically from other parts of the Corresponding
Source.
The Corresponding Source for a work in source code form is that
same work.
2. Basic Permissions.
All rights granted under this License are granted for the term of
copyright on the Program, and are irrevocable provided the stated
conditions are met. This License explicitly affirms your unlimited
permission to run the unmodified Program. The output from running a
covered work is covered by this License only if the output, given its
content, constitutes a covered work. This License acknowledges your
rights of fair use or other equivalent, as provided by copyright law.
You may make, run and propagate covered works that you do not
convey, without conditions so long as your license otherwise remains
in force. You may convey covered works to others for the sole purpose
of having them make modifications exclusively for you, or provide you
with facilities for running those works, provided that you comply with
the terms of this License in conveying all material for which you do
not control copyright. Those thus making or running the covered works
for you must do so exclusively on your behalf, under your direction
and control, on terms that prohibit them from making any copies of
your copyrighted material outside their relationship with you.
Conveying under any other circumstances is permitted solely under
the conditions stated below. Sublicensing is not allowed; section 10
makes it unnecessary.
3. Protecting Users' Legal Rights From Anti-Circumvention Law.
No covered work shall be deemed part of an effective technological
measure under any applicable law fulfilling obligations under article
11 of the WIPO copyright treaty adopted on 20 December 1996, or
similar laws prohibiting or restricting circumvention of such
measures.
When you convey a covered work, you waive any legal power to forbid
circumvention of technological measures to the extent such circumvention
is effected by exercising rights under this License with respect to
the covered work, and you disclaim any intention to limit operation or
modification of the work as a means of enforcing, against the work's
users, your or third parties' legal rights to forbid circumvention of
technological measures.
4. Conveying Verbatim Copies.
You may convey verbatim copies of the Program's source code as you
receive it, in any medium, provided that you conspicuously and
appropriately publish on each copy an appropriate copyright notice;
keep intact all notices stating that this License and any
non-permissive terms added in accord with section 7 apply to the code;
keep intact all notices of the absence of any warranty; and give all
recipients a copy of this License along with the Program.
You may charge any price or no price for each copy that you convey,
and you may offer support or warranty protection for a fee.
5. Conveying Modified Source Versions.
You may convey a work based on the Program, or the modifications to
produce it from the Program, in the form of source code under the
terms of section 4, provided that you also meet all of these conditions:
a) The work must carry prominent notices stating that you modified
it, and giving a relevant date.
b) The work must carry prominent notices stating that it is
released under this License and any conditions added under section
7. This requirement modifies the requirement in section 4 to
"keep intact all notices".
c) You must license the entire work, as a whole, under this
License to anyone who comes into possession of a copy. This
License will therefore apply, along with any applicable section 7
additional terms, to the whole of the work, and all its parts,
regardless of how they are packaged. This License gives no
permission to license the work in any other way, but it does not
invalidate such permission if you have separately received it.
d) If the work has interactive user interfaces, each must display
Appropriate Legal Notices; however, if the Program has interactive
interfaces that do not display Appropriate Legal Notices, your
work need not make them do so.
A compilation of a covered work with other separate and independent
works, which are not by their nature extensions of the covered work,
and which are not combined with it such as to form a larger program,
in or on a volume of a storage or distribution medium, is called an
"aggregate" if the compilation and its resulting copyright are not
used to limit the access or legal rights of the compilation's users
beyond what the individual works permit. Inclusion of a covered work
in an aggregate does not cause this License to apply to the other
parts of the aggregate.
6. Conveying Non-Source Forms.
You may convey a covered work in object code form under the terms
of sections 4 and 5, provided that you also convey the
machine-readable Corresponding Source under the terms of this License,
in one of these ways:
a) Convey the object code in, or embodied in, a physical product
(including a physical distribution medium), accompanied by the
Corresponding Source fixed on a durable physical medium
customarily used for software interchange.
b) Convey the object code in, or embodied in, a physical product
(including a physical distribution medium), accompanied by a
written offer, valid for at least three years and valid for as
long as you offer spare parts or customer support for that product
model, to give anyone who possesses the object code either (1) a
copy of the Corresponding Source for all the software in the
product that is covered by this License, on a durable physical
medium customarily used for software interchange, for a price no
more than your reasonable cost of physically performing this
conveying of source, or (2) access to copy the
Corresponding Source from a network server at no charge.
c) Convey individual copies of the object code with a copy of the
written offer to provide the Corresponding Source. This
alternative is allowed only occasionally and noncommercially, and
only if you received the object code with such an offer, in accord
with subsection 6b.
d) Convey the object code by offering access from a designated
place (gratis or for a charge), and offer equivalent access to the
Corresponding Source in the same way through the same place at no
further charge. You need not require recipients to copy the
Corresponding Source along with the object code. If the place to
copy the object code is a network server, the Corresponding Source
may be on a different server (operated by you or a third party)
that supports equivalent copying facilities, provided you maintain
clear directions next to the object code saying where to find the
Corresponding Source. Regardless of what server hosts the
Corresponding Source, you remain obligated to ensure that it is
available for as long as needed to satisfy these requirements.
e) Convey the object code using peer-to-peer transmission, provided
you inform other peers where the object code and Corresponding
Source of the work are being offered to the general public at no
charge under subsection 6d.
A separable portion of the object code, whose source code is excluded
from the Corresponding Source as a System Library, need not be
included in conveying the object code work.
A "User Product" is either (1) a "consumer product", which means any
tangible personal property which is normally used for personal, family,
or household purposes, or (2) anything designed or sold for incorporation
into a dwelling. In determining whether a product is a consumer product,
doubtful cases shall be resolved in favor of coverage. For a particular
product received by a particular user, "normally used" refers to a
typical or common use of that class of product, regardless of the status
of the particular user or of the way in which the particular user
actually uses, or expects or is expected to use, the product. A product
is a consumer product regardless of whether the product has substantial
commercial, industrial or non-consumer uses, unless such uses represent
the only significant mode of use of the product.
"Installation Information" for a User Product means any methods,
procedures, authorization keys, or other information required to install
and execute modified versions of a covered work in that User Product from
a modified version of its Corresponding Source. The information must
suffice to ensure that the continued functioning of the modified object
code is in no case prevented or interfered with solely because
modification has been made.
If you convey an object code work under this section in, or with, or
specifically for use in, a User Product, and the conveying occurs as
part of a transaction in which the right of possession and use of the
User Product is transferred to the recipient in perpetuity or for a
fixed term (regardless of how the transaction is characterized), the
Corresponding Source conveyed under this section must be accompanied
by the Installation Information. But this requirement does not apply
if neither you nor any third party retains the ability to install
modified object code on the User Product (for example, the work has
been installed in ROM).
The requirement to provide Installation Information does not include a
requirement to continue to provide support service, warranty, or updates
for a work that has been modified or installed by the recipient, or for
the User Product in which it has been modified or installed. Access to a
network may be denied when the modification itself materially and
adversely affects the operation of the network or violates the rules and
protocols for communication across the network.
Corresponding Source conveyed, and Installation Information provided,
in accord with this section must be in a format that is publicly
documented (and with an implementation available to the public in
source code form), and must require no special password or key for
unpacking, reading or copying.
7. Additional Terms.
"Additional permissions" are terms that supplement the terms of this
License by making exceptions from one or more of its conditions.
Additional permissions that are applicable to the entire Program shall
be treated as though they were included in this License, to the extent
that they are valid under applicable law. If additional permissions
apply only to part of the Program, that part may be used separately
under those permissions, but the entire Program remains governed by
this License without regard to the additional permissions.
When you convey a copy of a covered work, you may at your option
remove any additional permissions from that copy, or from any part of
it. (Additional permissions may be written to require their own
removal in certain cases when you modify the work.) You may place
additional permissions on material, added by you to a covered work,
for which you have or can give appropriate copyright permission.
Notwithstanding any other provision of this License, for material you
add to a covered work, you may (if authorized by the copyright holders of
that material) supplement the terms of this License with terms:
a) Disclaiming warranty or limiting liability differently from the
terms of sections 15 and 16 of this License; or
b) Requiring preservation of specified reasonable legal notices or
author attributions in that material or in the Appropriate Legal
Notices displayed by works containing it; or
c) Prohibiting misrepresentation of the origin of that material, or
requiring that modified versions of such material be marked in
reasonable ways as different from the original version; or
d) Limiting the use for publicity purposes of names of licensors or
authors of the material; or
e) Declining to grant rights under trademark law for use of some
trade names, trademarks, or service marks; or
f) Requiring indemnification of licensors and authors of that
material by anyone who conveys the material (or modified versions of
it) with contractual assumptions of liability to the recipient, for
any liability that these contractual assumptions directly impose on
those licensors and authors.
All other non-permissive additional terms are considered "further
restrictions" within the meaning of section 10. If the Program as you
received it, or any part of it, contains a notice stating that it is
governed by this License along with a term that is a further
restriction, you may remove that term. If a license document contains
a further restriction but permits relicensing or conveying under this
License, you may add to a covered work material governed by the terms
of that license document, provided that the further restriction does
not survive such relicensing or conveying.
If you add terms to a covered work in accord with this section, you
must place, in the relevant source files, a statement of the
additional terms that apply to those files, or a notice indicating
where to find the applicable terms.
Additional terms, permissive or non-permissive, may be stated in the
form of a separately written license, or stated as exceptions;
the above requirements apply either way.
8. Termination.
You may not propagate or modify a covered work except as expressly
provided under this License. Any attempt otherwise to propagate or
modify it is void, and will automatically terminate your rights under
this License (including any patent licenses granted under the third
paragraph of section 11).
However, if you cease all violation of this License, then your
license from a particular copyright holder is reinstated (a)
provisionally, unless and until the copyright holder explicitly and
finally terminates your license, and (b) permanently, if the copyright
holder fails to notify you of the violation by some reasonable means
prior to 60 days after the cessation.
Moreover, your license from a particular copyright holder is
reinstated permanently if the copyright holder notifies you of the
violation by some reasonable means, this is the first time you have
received notice of violation of this License (for any work) from that
copyright holder, and you cure the violation prior to 30 days after
your receipt of the notice.
Termination of your rights under this section does not terminate the
licenses of parties who have received copies or rights from you under
this License. If your rights have been terminated and not permanently
reinstated, you do not qualify to receive new licenses for the same
material under section 10.
9. Acceptance Not Required for Having Copies.
You are not required to accept this License in order to receive or
run a copy of the Program. Ancillary propagation of a covered work
occurring solely as a consequence of using peer-to-peer transmission
to receive a copy likewise does not require acceptance. However,
nothing other than this License grants you permission to propagate or
modify any covered work. These actions infringe copyright if you do
not accept this License. Therefore, by modifying or propagating a
covered work, you indicate your acceptance of this License to do so.
10. Automatic Licensing of Downstream Recipients.
Each time you convey a covered work, the recipient automatically
receives a license from the original licensors, to run, modify and
propagate that work, subject to this License. You are not responsible
for enforcing compliance by third parties with this License.
An "entity transaction" is a transaction transferring control of an
organization, or substantially all assets of one, or subdividing an
organization, or merging organizations. If propagation of a covered
work results from an entity transaction, each party to that
transaction who receives a copy of the work also receives whatever
licenses to the work the party's predecessor in interest had or could
give under the previous paragraph, plus a right to possession of the
Corresponding Source of the work from the predecessor in interest, if
the predecessor has it or can get it with reasonable efforts.
You may not impose any further restrictions on the exercise of the
rights granted or affirmed under this License. For example, you may
not impose a license fee, royalty, or other charge for exercise of
rights granted under this License, and you may not initiate litigation
(including a cross-claim or counterclaim in a lawsuit) alleging that
any patent claim is infringed by making, using, selling, offering for
sale, or importing the Program or any portion of it.
11. Patents.
A "contributor" is a copyright holder who authorizes use under this
License of the Program or a work on which the Program is based. The
work thus licensed is called the contributor's "contributor version".
A contributor's "essential patent claims" are all patent claims
owned or controlled by the contributor, whether already acquired or
hereafter acquired, that would be infringed by some manner, permitted
by this License, of making, using, or selling its contributor version,
but do not include claims that would be infringed only as a
consequence of further modification of the contributor version. For
purposes of this definition, "control" includes the right to grant
patent sublicenses in a manner consistent with the requirements of
this License.
Each contributor grants you a non-exclusive, worldwide, royalty-free
patent license under the contributor's essential patent claims, to
make, use, sell, offer for sale, import and otherwise run, modify and
propagate the contents of its contributor version.
In the following three paragraphs, a "patent license" is any express
agreement or commitment, however denominated, not to enforce a patent
(such as an express permission to practice a patent or covenant not to
sue for patent infringement). To "grant" such a patent license to a
party means to make such an agreement or commitment not to enforce a
patent against the party.
If you convey a covered work, knowingly relying on a patent license,
and the Corresponding Source of the work is not available for anyone
to copy, free of charge and under the terms of this License, through a
publicly available network server or other readily accessible means,
then you must either (1) cause the Corresponding Source to be so
available, or (2) arrange to deprive yourself of the benefit of the
patent license for this particular work, or (3) arrange, in a manner
consistent with the requirements of this License, to extend the patent
license to downstream recipients. "Knowingly relying" means you have
actual knowledge that, but for the patent license, your conveying the
covered work in a country, or your recipient's use of the covered work
in a country, would infringe one or more identifiable patents in that
country that you have reason to believe are valid.
If, pursuant to or in connection with a single transaction or
arrangement, you convey, or propagate by procuring conveyance of, a
covered work, and grant a patent license to some of the parties
receiving the covered work authorizing them to use, propagate, modify
or convey a specific copy of the covered work, then the patent license
you grant is automatically extended to all recipients of the covered
work and works based on it.
A patent license is "discriminatory" if it does not include within
the scope of its coverage, prohibits the exercise of, or is
conditioned on the non-exercise of one or more of the rights that are
specifically granted under this License. You may not convey a covered
work if you are a party to an arrangement with a third party that is
in the business of distributing software, under which you make payment
to the third party based on the extent of your activity of conveying
the work, and under which the third party grants, to any of the
parties who would receive the covered work from you, a discriminatory
patent license (a) in connection with copies of the covered work
conveyed by you (or copies made from those copies), or (b) primarily
for and in connection with specific products or compilations that
contain the covered work, unless you entered into that arrangement,
or that patent license was granted, prior to 28 March 2007.
Nothing in this License shall be construed as excluding or limiting
any implied license or other defenses to infringement that may
otherwise be available to you under applicable patent law.
12. No Surrender of Others' Freedom.
If conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License. If you cannot convey a
covered work so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you may
not convey it at all. For example, if you agree to terms that obligate you
to collect a royalty for further conveying from those to whom you convey
the Program, the only way you could satisfy both those terms and this
License would be to refrain entirely from conveying the Program.
13. Use with the GNU Affero General Public License.
Notwithstanding any other provision of this License, you have
permission to link or combine any covered work with a work licensed
under version 3 of the GNU Affero General Public License into a single
combined work, and to convey the resulting work. The terms of this
License will continue to apply to the part which is the covered work,
but the special requirements of the GNU Affero General Public License,
section 13, concerning interaction through a network will apply to the
combination as such.
14. Revised Versions of this License.
The Free Software Foundation may publish revised and/or new versions of
the GNU General Public License from time to time. Such new versions will
be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.
Each version is given a distinguishing version number. If the
Program specifies that a certain numbered version of the GNU General
Public License "or any later version" applies to it, you have the
option of following the terms and conditions either of that numbered
version or of any later version published by the Free Software
Foundation. If the Program does not specify a version number of the
GNU General Public License, you may choose any version ever published
by the Free Software Foundation.
If the Program specifies that a proxy can decide which future
versions of the GNU General Public License can be used, that proxy's
public statement of acceptance of a version permanently authorizes you
to choose that version for the Program.
Later license versions may give you additional or different
permissions. However, no additional obligations are imposed on any
author or copyright holder as a result of your choosing to follow a
later version.
15. Disclaimer of Warranty.
THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
16. Limitation of Liability.
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
17. Interpretation of Sections 15 and 16.
If the disclaimer of warranty and limitation of liability provided
above cannot be given local legal effect according to their terms,
reviewing courts shall apply local law that most closely approximates
an absolute waiver of all civil liability in connection with the
Program, unless a warranty or assumption of liability accompanies a
copy of the Program in return for a fee.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest
to attach them to the start of each source file to most effectively
state the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.
<one line to give the program's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
Also add information on how to contact you by electronic and paper mail.
If the program does terminal interaction, make it output a short
notice like this when it starts in an interactive mode:
<program> Copyright (C) <year> <name of author>
This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
This is free software, and you are welcome to redistribute it
under certain conditions; type `show c' for details.
The hypothetical commands `show w' and `show c' should show the appropriate
parts of the General Public License. Of course, your program's commands
might be different; for a GUI interface, you would use an "about box".
You should also get your employer (if you work as a programmer) or school,
if any, to sign a "copyright disclaimer" for the program, if necessary.
For more information on this, and how to apply and follow the GNU GPL, see
<http://www.gnu.org/licenses/>.
The GNU General Public License does not permit incorporating your program
into proprietary programs. If your program is a subroutine library, you
may consider it more useful to permit linking proprietary applications with
the library. If this is what you want to do, use the GNU Lesser General
Public License instead of this License. But first, please read
<http://www.gnu.org/philosophy/why-not-lgpl.html>.
local/recipes/qt/qt6-sensors/source/LICENSES/LGPL-3.0-only.txt
-165
View File
@@ -1,165 +0,0 @@
GNU LESSER GENERAL PUBLIC LICENSE
Version 3, 29 June 2007
Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
This version of the GNU Lesser General Public License incorporates
the terms and conditions of version 3 of the GNU General Public
License, supplemented by the additional permissions listed below.
0. Additional Definitions.
As used herein, "this License" refers to version 3 of the GNU Lesser
General Public License, and the "GNU GPL" refers to version 3 of the GNU
General Public License.
"The Library" refers to a covered work governed by this License,
other than an Application or a Combined Work as defined below.
An "Application" is any work that makes use of an interface provided
by the Library, but which is not otherwise based on the Library.
Defining a subclass of a class defined by the Library is deemed a mode
of using an interface provided by the Library.
A "Combined Work" is a work produced by combining or linking an
Application with the Library. The particular version of the Library
with which the Combined Work was made is also called the "Linked
Version".
The "Minimal Corresponding Source" for a Combined Work means the
Corresponding Source for the Combined Work, excluding any source code
for portions of the Combined Work that, considered in isolation, are
based on the Application, and not on the Linked Version.
The "Corresponding Application Code" for a Combined Work means the
object code and/or source code for the Application, including any data
and utility programs needed for reproducing the Combined Work from the
Application, but excluding the System Libraries of the Combined Work.
1. Exception to Section 3 of the GNU GPL.
You may convey a covered work under sections 3 and 4 of this License
without being bound by section 3 of the GNU GPL.
2. Conveying Modified Versions.
If you modify a copy of the Library, and, in your modifications, a
facility refers to a function or data to be supplied by an Application
that uses the facility (other than as an argument passed when the
facility is invoked), then you may convey a copy of the modified
version:
a) under this License, provided that you make a good faith effort to
ensure that, in the event an Application does not supply the
function or data, the facility still operates, and performs
whatever part of its purpose remains meaningful, or
b) under the GNU GPL, with none of the additional permissions of
this License applicable to that copy.
3. Object Code Incorporating Material from Library Header Files.
The object code form of an Application may incorporate material from
a header file that is part of the Library. You may convey such object
code under terms of your choice, provided that, if the incorporated
material is not limited to numerical parameters, data structure
layouts and accessors, or small macros, inline functions and templates
(ten or fewer lines in length), you do both of the following:
a) Give prominent notice with each copy of the object code that the
Library is used in it and that the Library and its use are
covered by this License.
b) Accompany the object code with a copy of the GNU GPL and this license
document.
4. Combined Works.
You may convey a Combined Work under terms of your choice that,
taken together, effectively do not restrict modification of the
portions of the Library contained in the Combined Work and reverse
engineering for debugging such modifications, if you also do each of
the following:
a) Give prominent notice with each copy of the Combined Work that
the Library is used in it and that the Library and its use are
covered by this License.
b) Accompany the Combined Work with a copy of the GNU GPL and this license
document.
c) For a Combined Work that displays copyright notices during
execution, include the copyright notice for the Library among
these notices, as well as a reference directing the user to the
copies of the GNU GPL and this license document.
d) Do one of the following:
0) Convey the Minimal Corresponding Source under the terms of this
License, and the Corresponding Application Code in a form
suitable for, and under terms that permit, the user to
recombine or relink the Application with a modified version of
the Linked Version to produce a modified Combined Work, in the
manner specified by section 6 of the GNU GPL for conveying
Corresponding Source.
1) Use a suitable shared library mechanism for linking with the
Library. A suitable mechanism is one that (a) uses at run time
a copy of the Library already present on the user's computer
system, and (b) will operate properly with a modified version
of the Library that is interface-compatible with the Linked
Version.
e) Provide Installation Information, but only if you would otherwise
be required to provide such information under section 6 of the
GNU GPL, and only to the extent that such information is
necessary to install and execute a modified version of the
Combined Work produced by recombining or relinking the
Application with a modified version of the Linked Version. (If
you use option 4d0, the Installation Information must accompany
the Minimal Corresponding Source and Corresponding Application
Code. If you use option 4d1, you must provide the Installation
Information in the manner specified by section 6 of the GNU GPL
for conveying Corresponding Source.)
5. Combined Libraries.
You may place library facilities that are a work based on the
Library side by side in a single library together with other library
facilities that are not Applications and are not covered by this
License, and convey such a combined library under terms of your
choice, if you do both of the following:
a) Accompany the combined library with a copy of the same work based
on the Library, uncombined with any other library facilities,
conveyed under the terms of this License.
b) Give prominent notice with the combined library that part of it
is a work based on the Library, and explaining where to find the
accompanying uncombined form of the same work.
6. Revised Versions of the GNU Lesser General Public License.
The Free Software Foundation may publish revised and/or new versions
of the GNU Lesser General Public License from time to time. Such new
versions will be similar in spirit to the present version, but may
differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the
Library as you received it specifies that a certain numbered version
of the GNU Lesser General Public License "or any later version"
applies to it, you have the option of following the terms and
conditions either of that published version or of any later version
published by the Free Software Foundation. If the Library as you
received it does not specify a version number of the GNU Lesser
General Public License, you may choose any version of the GNU Lesser
General Public License ever published by the Free Software Foundation.
If the Library as you received it specifies that a proxy can decide
whether future versions of the GNU Lesser General Public License shall
apply, that proxy's public statement of acceptance of any version is
permanent authorization for you to choose that version for the
Library.
local/recipes/qt/qt6-sensors/source/LICENSES/LicenseRef-Qt-Commercial.txt
-8
View File
@@ -1,8 +0,0 @@
Licensees holding valid commercial Qt licenses may use this software in
accordance with the the terms contained in a written agreement between
you and The Qt Company. Alternatively, the terms and conditions that were
accepted by the licensee when buying and/or downloading the
software do apply.
For the latest licensing terms and conditions, see https://www.qt.io/terms-conditions.
For further information use the contact form at https://www.qt.io/contact-us.
local/recipes/qt/qt6-sensors/source/LICENSES/Qt-GPL-exception-1.0.txt
-22
View File
@@ -1,22 +0,0 @@
The Qt Company GPL Exception 1.0
Exception 1:
As a special exception you may create a larger work which contains the
output of this application and distribute that work under terms of your
choice, so long as the work is not otherwise derived from or based on
this application and so long as the work does not in itself generate
output that contains the output from this application in its original
or modified form.
Exception 2:
As a special exception, you have permission to combine this application
with Plugins licensed under the terms of your choice, to produce an
executable, and to copy and distribute the resulting executable under
the terms of your choice. However, the executable must be accompanied
by a prominent notice offering all users of the executable the entire
source code to this application, excluding the source code of the
independent modules, but including any changes you have made to this
application, under the terms of this license.
local/recipes/qt/qt6-sensors/source/REUSE.toml
-61
View File
@@ -1,61 +0,0 @@
version = 1
[[annotations]]
path = ["tests/**.txt", "tests/**.ui"]
precedence = "closest"
SPDX-FileCopyrightText = "Copyright (C) The Qt Company Ltd."
SPDX-License-Identifier = "LicenseRef-Qt-Commercial OR GPL-3.0-only"
[[annotations]]
path = ["src/plugins/**"]
precedence = "closest"
SPDX-FileCopyrightText = "Copyright (C) The Qt Company Ltd."
SPDX-License-Identifier = "LicenseRef-Qt-Commercial OR LGPL-3.0-only OR GPL-2.0-only OR GPL-3.0-only"
[[annotations]]
path = ["**.qrc", "**CMakeLists.txt", "**.yaml", "**configure.json",
"**.cfg", "qt_cmdline.cmake", "**.pri", "**.conf",
"**ci_config_linux.json", ".tag"]
precedence = "closest"
comment = "build system"
SPDX-FileCopyrightText = "Copyright (C) The Qt Company Ltd."
SPDX-License-Identifier = "BSD-3-Clause"
[[annotations]]
path = ["**/.gitattributes", "**.gitignore", "**.gitreview"]
precedence = "closest"
SPDX-FileCopyrightText = "Copyright (C) The Qt Company Ltd."
SPDX-License-Identifier = "LicenseRef-Qt-Commercial OR BSD-3-Clause"
[[annotations]]
path = ["examples/**"]
comment = "this must be after the build system table because example and snippets take precedence over build system"
precedence = "closest"
SPDX-FileCopyrightText = "Copyright (C) The Qt Company Ltd."
SPDX-License-Identifier = "LicenseRef-Qt-Commercial OR BSD-3-Clause"
[[annotations]]
path = ["**/doc/images/**", "**.qdocconf", "doc/**.dia"]
comment = "documentation"
precedence = "closest"
SPDX-FileCopyrightText = "Copyright (C) The Qt Company Ltd."
SPDX-License-Identifier = "LicenseRef-Qt-Commercial OR GFDL-1.3-no-invariants-only"
[[annotations]]
path = ["**.toml", "licenseRule.json"]
precedence = "override"
SPDX-FileCopyrightText = "Copyright (C) The Qt Company Ltd."
SPDX-License-Identifier = "LicenseRef-Qt-Commercial OR BSD-3-Clause"
[[annotations]]
path = ["**/qt_attribution.json"]
precedence = "override"
SPDX-FileCopyrightText = "Copyright (C) The Qt Company Ltd."
SPDX-License-Identifier = "LicenseRef-Qt-Commercial OR GFDL-1.3-no-invariants-only"
[[annotations]]
path = ["**LICENSE*"]
precedence = "override"
comment = "License file."
SPDX-FileCopyrightText = "None"
SPDX-License-Identifier = "CC0-1.0"
local/recipes/qt/qt6-sensors/source/cmake/FindSensorfw.cmake
-13
View File
@@ -1,13 +0,0 @@
# Copyright (C) 2022 The Qt Company Ltd.
# SPDX-License-Identifier: BSD-3-Clause
find_package(PkgConfig)
if (PKG_CONFIG_FOUND)
pkg_check_modules(Sensorfw sensord-qt5 IMPORTED_TARGET)
if (NOT TARGET PkgConfig::Sensorfw)
set(Sensorfw_FOUND 0)
endif()
else()
message("Sensorfw pkg not found. Looking for library")
find_library(Sensorfw sensorfw)
endif()
local/recipes/qt/qt6-sensors/source/coin/axivion/ci_config_linux.json
-44
View File
@@ -1,44 +0,0 @@
{
"Project": {
"BuildSystemIntegration": {
"child_order": [
"GCCSetup",
"CMake",
"LinkLibraries"
]
},
"CMake": {
"_active": true,
"_copy_from": "CMakeIntegration",
"build_environment": {},
"build_options": "-j4",
"generate_options": "--fresh",
"generator": "Ninja"
},
"GCCSetup": {
"_active": true,
"_copy_from": "Command",
"build_command": "gccsetup --cc gcc --cxx g++ --config ../../../axivion/"
},
"LinkLibraries": {
"_active": true,
"_copy_from": "AxivionLinker",
"input_files": [
"build/lib/lib*.so*.ir",
"build/qml/*/lib*.so*.ir"
],
"ir": "build/$(env:TESTED_MODULE_COIN).ir",
"plugin_files": [
"build/plugins/*/lib*.so*.ir"
]
}
},
"_Format": "1.0",
"_Version": "7.6.2",
"_VersionNum": [
7,
6,
2,
12725
]
}
local/recipes/qt/qt6-sensors/source/coin/module_config.yaml
-16
View File
@@ -1,16 +0,0 @@
version: 2
accept_configuration:
condition: property
property: features
not_contains_value: Disable
instructions:
Build:
- type: EnvironmentVariable
variableName: VERIFY_SOURCE_SBOM
variableValue: "ON"
- !include "{{qt/qtbase}}/coin_module_build_template_v2.yaml"
Test:
- !include "{{qt/qtbase}}/coin_module_test_template_v3.yaml"
- !include "{{qt/qtbase}}/coin_module_test_docs.yaml"
local/recipes/qt/qt6-sensors/source/config.tests/winrt/CMakeLists.txt
-37
View File
@@ -1,37 +0,0 @@
# Copyright (C) 2022 The Qt Company Ltd.
# SPDX-License-Identifier: BSD-3-Clause
cmake_minimum_required(VERSION 3.16)
project(config_test_winrt LANGUAGES C CXX)
if(DEFINED QT_CONFIG_COMPILE_TEST_CMAKE_SYSTEM_PREFIX_PATH)
set(CMAKE_SYSTEM_PREFIX_PATH "${QT_CONFIG_COMPILE_TEST_CMAKE_SYSTEM_PREFIX_PATH}")
endif()
if(DEFINED QT_CONFIG_COMPILE_TEST_CMAKE_SYSTEM_FRAMEWORK_PATH)
set(CMAKE_SYSTEM_FRAMEWORK_PATH "${QT_CONFIG_COMPILE_TEST_CMAKE_SYSTEM_FRAMEWORK_PATH}")
endif()
foreach(p ${QT_CONFIG_COMPILE_TEST_PACKAGES})
find_package(${p})
endforeach()
if(QT_CONFIG_COMPILE_TEST_LIBRARIES)
link_libraries(${QT_CONFIG_COMPILE_TEST_LIBRARIES})
endif()
if(QT_CONFIG_COMPILE_TEST_LIBRARY_TARGETS)
foreach(lib ${QT_CONFIG_COMPILE_TEST_LIBRARY_TARGETS})
if(TARGET ${lib})
link_libraries(${lib})
endif()
endforeach()
endif()
add_executable(${PROJECT_NAME}
main.cpp
)
if(MSVC)
target_link_libraries(${PROJECT_NAME} PRIVATE
runtimeobject
)
endif()
local/recipes/qt/qt6-sensors/source/config.tests/winrt/main.cpp
-26
View File
@@ -1,26 +0,0 @@
// Copyright (C) 2021 The Qt Company Ltd.
// SPDX-License-Identifier: BSD-3-Clause
#include <functional>
#include <windows.system.h>
#include <windows.devices.sensors.h>
#include <windows.foundation.h>
#include <wrl.h>
using namespace Microsoft::WRL;
using namespace Microsoft::WRL::Wrappers;
using namespace ABI::Windows::Foundation;
using namespace ABI::Windows::Devices::Sensors;
typedef ITypedEventHandler<Accelerometer *, AccelerometerReadingChangedEventArgs *> AccelerometerReadingHandler;
int main(int, char**)
{
HStringReference classId(RuntimeClass_Windows_Devices_Sensors_Accelerometer);
ComPtr<IAccelerometer> sensor;
ComPtr<IAccelerometerStatics> factory;
HRESULT hr = RoGetActivationFactory(classId.Get(), IID_PPV_ARGS(&factory));
hr = factory->GetDefault(&sensor);
return 0;
}
local/recipes/qt/qt6-sensors/source/configure.cmake
-24
View File
@@ -1,24 +0,0 @@
# Copyright (C) 2022 The Qt Company Ltd.
# SPDX-License-Identifier: BSD-3-Clause
#### Inputs
#### Libraries
#### Tests
#### Features
qt_extra_definition("QT_VERSION_STR" "\"${PROJECT_VERSION}\"" PUBLIC)
qt_extra_definition("QT_VERSION_MAJOR" ${PROJECT_VERSION_MAJOR} PUBLIC)
qt_extra_definition("QT_VERSION_MINOR" ${PROJECT_VERSION_MINOR} PUBLIC)
qt_extra_definition("QT_VERSION_PATCH" ${PROJECT_VERSION_PATCH} PUBLIC)
local/recipes/qt/qt6-sensors/source/configure.json
-5
View File
@@ -1,5 +0,0 @@
{
"subconfigs": [
"src/sensors"
]
}
local/recipes/qt/qt6-sensors/source/dependencies.yaml
-7
View File
@@ -1,7 +0,0 @@
dependencies:
../qtbase:
ref: 8ba7ea4b77a4b8f1948760221e264917ddc9e1c8
required: true
../qtdeclarative:
ref: e602a097ca314e9610b1fd3b7dbfa467a868731a
required: false
local/recipes/qt/qt6-sensors/source/dist/REUSE.toml
Vendored
-8
View File
@@ -1,8 +0,0 @@
version = 1
[[annotations]]
path = ["*"]
precedence = "override"
comment = "Licensed as documentation."
SPDX-FileCopyrightText = "Copyright (C) The Qt Company Ltd."
SPDX-License-Identifier = "LicenseRef-Qt-Commercial OR GFDL-1.3-no-invariants-only"
local/recipes/qt/qt6-sensors/source/dist/changes-5.1.0
Vendored
-52
View File
@@ -1,52 +0,0 @@
Qt 5.1 introduces many new features and improvements as well as bugfixes
over the 5.0.x series. For more details, refer to the online documentation
included in this distribution. The documentation is also available online:
http://qt-project.org/doc/qt-5.1
The Qt version 5.1 series is binary compatible with the 5.0.x series.
Applications compiled for 5.0 will continue to run with 5.1.
Some of the changes listed in this file include issue tracking numbers
corresponding to tasks in the Qt Bug Tracker:
http://bugreports.qt-project.org/
Each of these identifiers can be entered in the bug tracker to obtain more
information about a particular change.
****************************************************************************
* General *
****************************************************************************
- Add a QAmbientTemperatureSensor class.
- Add a QAltimeter class.
- Add QHolsterSensor
- Add API for duplicate skipping
- Add QPressureSensor
- Add QSensor::isFeatureSupported()
- Add linux sys accelerometer reader backend
- Introduce QRotationReading::setFromEuler() in favor of set{X/Y/Z}()
- Add support for the compass sensor
- Add support for the pressure sensor
- Add support for the IR proximity sensor
- Add support for tilt sensor
- Add sensor backend for sensorfw
- Add freefall sensor gesture
Qt for Android
--------------
- Sensor implementation for Android
Qt for BlackBerry
-----------------
- Support QMagnetometer::returnGeoValues
- Prevent spurious calls to dataAvailable() when stopped
Qt for iOS
----------
- Implement accelerometer for iOS
local/recipes/qt/qt6-sensors/source/dist/changes-5.1.1
Vendored
-25
View File
@@ -1,25 +0,0 @@
Qt 5.1.1 is a bug-fix release. It maintains both forward and backward
compatibility (source and binary) with Qt 5.1.0.
For more details, refer to the online documentation included in this
distribution. The documentation is also available online:
http://qt-project.org/doc/qt-5.1/
The Qt version 5.1 series is binary compatible with the 5.0.x series.
Applications compiled for 5.0 will continue to run with 5.1.
Some of the changes listed in this file include issue tracking numbers
corresponding to tasks in the Qt Bug Tracker:
http://bugreports.qt-project.org/
Each of these identifiers can be entered in the bug tracker to obtain more
information about a particular change.
****************************************************************************
* General *
****************************************************************************
- [QTBUG-32108] Freefall gesture needs to be initialized into plugin to be usable
local/recipes/qt/qt6-sensors/source/dist/changes-5.10.0
Vendored
-22
View File
@@ -1,22 +0,0 @@
Qt 5.10 introduces many new features and improvements as well as bugfixes
over the 5.9.x series. For more details, refer to the online documentation
included in this distribution. The documentation is also available online:
http://doc.qt.io/qt-5/index.html
The Qt version 5.10 series is binary compatible with the 5.9.x series.
Applications compiled for 5.9 will continue to run with 5.10.
Some of the changes listed in this file include issue tracking numbers
corresponding to tasks in the Qt Bug Tracker:
https://bugreports.qt.io/
Each of these identifiers can be entered in the bug tracker to obtain more
information about a particular change.
****************************************************************************
* Qt 5.10.0 Changes *
****************************************************************************
- This release contains only minor code improvements.
local/recipes/qt/qt6-sensors/source/dist/changes-5.10.1
Vendored
-30
View File
@@ -1,30 +0,0 @@
Qt 5.10.1 is a bug-fix release. It maintains both forward and backward
compatibility (source and binary) with Qt 5.10.0.
For more details, refer to the online documentation included in this
distribution. The documentation is also available online:
http://doc.qt.io/qt-5/index.html
The Qt version 5.10 series is binary compatible with the 5.9.x series.
Applications compiled for 5.9 will continue to run with 5.10.
Some of the changes listed in this file include issue tracking numbers
corresponding to tasks in the Qt Bug Tracker:
https://bugreports.qt.io/
Each of these identifiers can be entered in the bug tracker to obtain more
information about a particular change.
This release contains all fixes included in the Qt 5.9.4 release.
****************************************************************************
* Qt 5.10.1 Changes *
****************************************************************************
QtSensors
---------
- Fixed missing QML version bump. The QML import statement for QtSensors
was still 5.9.
local/recipes/qt/qt6-sensors/source/dist/changes-5.11.0
Vendored
-29
View File
@@ -1,29 +0,0 @@
Qt 5.11 introduces many new features and improvements as well as bugfixes
over the 5.10.x series. For more details, refer to the online documentation
included in this distribution. The documentation is also available online:
http://doc.qt.io/qt-5/index.html
The Qt version 5.11 series is binary compatible with the 5.10.x series.
Applications compiled for 5.10 will continue to run with 5.11.
Some of the changes listed in this file include issue tracking numbers
corresponding to tasks in the Qt Bug Tracker:
https://bugreports.qt.io/
Each of these identifiers can be entered in the bug tracker to obtain more
information about a particular change.
****************************************************************************
* Qt 5.11.0 Changes *
****************************************************************************
QtSensors
---------
- Support for TI Sensortag sensor board.
- [QTBUG-57898] Fixed device orientation angles provided by QTiltSensor.
- Fixed various documentation issues.
local/recipes/qt/qt6-sensors/source/dist/changes-5.11.1
Vendored
-24
View File
@@ -1,24 +0,0 @@
Qt 5.11.1 is a bug-fix release. It maintains both forward and backward
compatibility (source and binary) with Qt 5.11.0.
For more details, refer to the online documentation included in this
distribution. The documentation is also available online:
http://doc.qt.io/qt-5/index.html
The Qt version 5.11 series is binary compatible with the 5.10.x series.
Applications compiled for 5.10 will continue to run with 5.11.
Some of the changes listed in this file include issue tracking numbers
corresponding to tasks in the Qt Bug Tracker:
https://bugreports.qt.io/
Each of these identifiers can be entered in the bug tracker to obtain more
information about a particular change.
****************************************************************************
* Qt 5.11.1 Changes *
****************************************************************************
- [QTBUG-68277] Fixed accelbubble example.
local/recipes/qt/qt6-sensors/source/dist/changes-5.11.2
Vendored
-24
View File
@@ -1,24 +0,0 @@
Qt 5.11.2 is a bug-fix release. It maintains both forward and backward
compatibility (source and binary) with Qt 5.11.0 through 5.11.1.
For more details, refer to the online documentation included in this
distribution. The documentation is also available online:
http://doc.qt.io/qt-5/index.html
The Qt version 5.11 series is binary compatible with the 5.10.x series.
Applications compiled for 5.10 will continue to run with 5.11.
Some of the changes listed in this file include issue tracking numbers
corresponding to tasks in the Qt Bug Tracker:
https://bugreports.qt.io/
Each of these identifiers can be entered in the bug tracker to obtain more
information about a particular change.
****************************************************************************
* Qt 5.11.2 Changes *
****************************************************************************
- This release contains only minor code improvements.
local/recipes/qt/qt6-sensors/source/dist/changes-5.11.3
Vendored
-20
View File
@@ -1,20 +0,0 @@
Qt 5.11.3 is a bug-fix release. It maintains both forward and backward
compatibility (source and binary) with Qt 5.11.0 through 5.11.2.
For more details, refer to the online documentation included in this
distribution. The documentation is also available online:
http://doc.qt.io/qt-5/index.html
The Qt version 5.11 series is binary compatible with the 5.10.x series.
Applications compiled for 5.10 will continue to run with 5.11.
Some of the changes listed in this file include issue tracking numbers
corresponding to tasks in the Qt Bug Tracker:
https://bugreports.qt.io/
Each of these identifiers can be entered in the bug tracker to obtain more
information about a particular change.
- This release contains only minor code improvements.
local/recipes/qt/qt6-sensors/source/dist/changes-5.12.0
Vendored
-27
View File
@@ -1,27 +0,0 @@
Qt 5.12 introduces many new features and improvements as well as bugfixes
over the 5.11.x series. For more details, refer to the online documentation
included in this distribution. The documentation is also available online:
https://doc.qt.io/qt-5/index.html
The Qt version 5.12 series is binary compatible with the 5.11.x series.
Applications compiled for 5.11 will continue to run with 5.12.
Some of the changes listed in this file include issue tracking numbers
corresponding to tasks in the Qt Bug Tracker:
https://bugreports.qt.io/
Each of these identifiers can be entered in the bug tracker to obtain more
information about a particular change.
****************************************************************************
* Android *
****************************************************************************
- Examples:
* [QTBUG-70159] Updated AndroidManifest.xml in accelbubble example to be
compatible with Qt again.
- Documentation:
* [QTBUG-70625] remove iOS from compatmap for AmbientLight sensor
local/recipes/qt/qt6-sensors/source/dist/changes-5.12.1
Vendored
-26
View File
@@ -1,26 +0,0 @@
Qt 5.12.1 is a bug-fix release. It maintains both forward and backward
compatibility (source and binary) with Qt 5.12.0.
For more details, refer to the online documentation included in this
distribution. The documentation is also available online:
http://doc.qt.io/qt-5/index.html
The Qt version 5.12 series is binary compatible with the 5.11.x series.
Applications compiled for 5.11 will continue to run with 5.12.
Some of the changes listed in this file include issue tracking numbers
corresponding to tasks in the Qt Bug Tracker:
https://bugreports.qt.io/
Each of these identifiers can be entered in the bug tracker to obtain more
information about a particular change.
****************************************************************************
* Platform Specific Changes *
****************************************************************************
- Android:
* QCompassReading::calibrationLevel now returns a valid value when
possible.
local/recipes/qt/qt6-sensors/source/dist/changes-5.12.2
Vendored
-20
View File
@@ -1,20 +0,0 @@
Qt 5.12.2 is a bug-fix release. It maintains both forward and backward
compatibility (source and binary) with Qt 5.12.0 through 5.12.1.
For more details, refer to the online documentation included in this
distribution. The documentation is also available online:
https://doc.qt.io/qt-5/index.html
The Qt version 5.12 series is binary compatible with the 5.11.x series.
Applications compiled for 5.11 will continue to run with 5.12.
Some of the changes listed in this file include issue tracking numbers
corresponding to tasks in the Qt Bug Tracker:
https://bugreports.qt.io/
Each of these identifiers can be entered in the bug tracker to obtain more
information about a particular change.
- This release contains only minor code improvements.
local/recipes/qt/qt6-sensors/source/dist/changes-5.12.3
Vendored
-20
View File
@@ -1,20 +0,0 @@
Qt 5.12.3 is a bug-fix release. It maintains both forward and backward
compatibility (source and binary) with Qt 5.12.0 through 5.12.2.
For more details, refer to the online documentation included in this
distribution. The documentation is also available online:
https://doc.qt.io/qt-5/index.html
The Qt version 5.12 series is binary compatible with the 5.11.x series.
Applications compiled for 5.11 will continue to run with 5.12.
Some of the changes listed in this file include issue tracking numbers
corresponding to tasks in the Qt Bug Tracker:
https://bugreports.qt.io/
Each of these identifiers can be entered in the bug tracker to obtain more
information about a particular change.
- This release contains only minor code improvements.
local/recipes/qt/qt6-sensors/source/dist/changes-5.12.4
Vendored
-24
View File
@@ -1,24 +0,0 @@
Qt 5.12.4 is a bug-fix release. It maintains both forward and backward
compatibility (source and binary) with Qt 5.12.0 through 5.12.3.
For more details, refer to the online documentation included in this
distribution. The documentation is also available online:
https://doc.qt.io/qt-5/index.html
The Qt version 5.12 series is binary compatible with the 5.11.x series.
Applications compiled for 5.11 will continue to run with 5.12.
Some of the changes listed in this file include issue tracking numbers
corresponding to tasks in the Qt Bug Tracker:
https://bugreports.qt.io/
Each of these identifiers can be entered in the bug tracker to obtain more
information about a particular change.
****************************************************************************
* Android *
****************************************************************************
- Rewrite Qt Android Sensors using NDK API.
local/recipes/qt/qt6-sensors/source/dist/changes-5.12.5
Vendored
-20
View File
@@ -1,20 +0,0 @@
Qt 5.12.5 is a bug-fix release. It maintains both forward and backward
compatibility (source and binary) with Qt 5.12.0 through 5.12.4.
For more details, refer to the online documentation included in this
distribution. The documentation is also available online:
https://doc.qt.io/qt-5/index.html
The Qt version 5.12 series is binary compatible with the 5.11.x series.
Applications compiled for 5.11 will continue to run with 5.12.
Some of the changes listed in this file include issue tracking numbers
corresponding to tasks in the Qt Bug Tracker:
https://bugreports.qt.io/
Each of these identifiers can be entered in the bug tracker to obtain more
information about a particular change.
- This release contains only minor code improvements.
local/recipes/qt/qt6-sensors/source/dist/changes-5.13.0
Vendored
-24
View File
@@ -1,24 +0,0 @@
Qt 5.13 introduces many new features and improvements as well as bugfixes
over the 5.12.x series. For more details, refer to the online documentation
included in this distribution. The documentation is also available online:
https://doc.qt.io/qt-5/index.html
The Qt version 5.13 series is binary compatible with the 5.12.x series.
Applications compiled for 5.12 will continue to run with 5.13.
Some of the changes listed in this file include issue tracking numbers
corresponding to tasks in the Qt Bug Tracker:
https://bugreports.qt.io/
Each of these identifiers can be entered in the bug tracker to obtain more
information about a particular change.
****************************************************************************
* Android *
****************************************************************************
- Rewrite Qt Android Sensors using NDK API.
- Raise minimal Android sdk version to v21
local/recipes/qt/qt6-sensors/source/dist/changes-5.13.1
Vendored
-20
View File
@@ -1,20 +0,0 @@
Qt 5.13.1 is a bug-fix release. It maintains both forward and backward
compatibility (source and binary) with Qt 5.13.0.
For more details, refer to the online documentation included in this
distribution. The documentation is also available online:
https://doc.qt.io/qt-5/index.html
The Qt version 5.13 series is binary compatible with the 5.12.x series.
Applications compiled for 5.12 will continue to run with 5.13.
Some of the changes listed in this file include issue tracking numbers
corresponding to tasks in the Qt Bug Tracker:
https://bugreports.qt.io/
Each of these identifiers can be entered in the bug tracker to obtain more
information about a particular change.
- This release contains only minor code improvements.
local/recipes/qt/qt6-sensors/source/dist/changes-5.13.2
Vendored
-20
View File
@@ -1,20 +0,0 @@
Qt 5.13.2 is a bug-fix release. It maintains both forward and backward
compatibility (source and binary) with Qt 5.13.0 through 5.13.1.
For more details, refer to the online documentation included in this
distribution. The documentation is also available online:
https://doc.qt.io/qt-5/index.html
The Qt version 5.13 series is binary compatible with the 5.12.x series.
Applications compiled for 5.12 will continue to run with 5.13.
Some of the changes listed in this file include issue tracking numbers
corresponding to tasks in the Qt Bug Tracker:
https://bugreports.qt.io/
Each of these identifiers can be entered in the bug tracker to obtain more
information about a particular change.
- This release contains only minor code improvements.
local/recipes/qt/qt6-sensors/source/dist/changes-5.14.0
Vendored
-18
View File
@@ -1,18 +0,0 @@
Qt 5.14 introduces many new features and improvements as well as bugfixes
over the 5.13.x series. For more details, refer to the online documentation
included in this distribution. The documentation is also available online:
https://doc.qt.io/qt-5/index.html
The Qt version 5.14 series is binary compatible with the 5.13.x series.
Applications compiled for 5.13 will continue to run with 5.14.
Some of the changes listed in this file include issue tracking numbers
corresponding to tasks in the Qt Bug Tracker:
https://bugreports.qt.io/
Each of these identifiers can be entered in the bug tracker to obtain more
information about a particular change.
- This release contains only minor code improvements.
local/recipes/qt/qt6-sensors/source/dist/changes-5.14.1
Vendored
-20
View File
@@ -1,20 +0,0 @@
Qt 5.14.1 is a bug-fix release. It maintains both forward and backward
compatibility (source and binary) with Qt 5.14.0.
For more details, refer to the online documentation included in this
distribution. The documentation is also available online:
https://doc.qt.io/qt-5/index.html
The Qt version 5.14 series is binary compatible with the 5.13.x series.
Applications compiled for 5.13 will continue to run with 5.14.
Some of the changes listed in this file include issue tracking numbers
corresponding to tasks in the Qt Bug Tracker:
https://bugreports.qt.io/
Each of these identifiers can be entered in the bug tracker to obtain more
information about a particular change.
- This release contains only minor code improvements.
local/recipes/qt/qt6-sensors/source/dist/changes-5.14.2
Vendored
-20
View File
@@ -1,20 +0,0 @@
Qt 5.14.2 is a bug-fix release. It maintains both forward and backward
compatibility (source and binary) with Qt 5.14.0 through 5.14.1.
For more details, refer to the online documentation included in this
distribution. The documentation is also available online:
https://doc.qt.io/qt-5/index.html
The Qt version 5.14 series is binary compatible with the 5.13.x series.
Applications compiled for 5.13 will continue to run with 5.14.
Some of the changes listed in this file include issue tracking numbers
corresponding to tasks in the Qt Bug Tracker:
https://bugreports.qt.io/
Each of these identifiers can be entered in the bug tracker to obtain more
information about a particular change.
- This release contains only minor code improvements.
local/recipes/qt/qt6-sensors/source/dist/changes-5.15.0
Vendored
-18
View File
@@ -1,18 +0,0 @@
Qt 5.15 introduces many new features and improvements as well as bugfixes
over the 5.14.x series. For more details, refer to the online documentation
included in this distribution. The documentation is also available online:
https://doc.qt.io/qt-5/index.html
The Qt version 5.15 series is binary compatible with the 5.14.x series.
Applications compiled for 5.14 will continue to run with 5.15.
Some of the changes listed in this file include issue tracking numbers
corresponding to tasks in the Qt Bug Tracker:
https://bugreports.qt.io/
Each of these identifiers can be entered in the bug tracker to obtain more
information about a particular change.
- This release contains only minor code improvements.
local/recipes/qt/qt6-sensors/source/dist/changes-5.15.1
Vendored
-20
View File
@@ -1,20 +0,0 @@
Qt 5.15.1 is a bug-fix release. It maintains both forward and backward
compatibility (source and binary) with Qt 5.15.0.
For more details, refer to the online documentation included in this
distribution. The documentation is also available online:
https://doc.qt.io/qt-5/index.html
The Qt version 5.15 series is binary compatible with the 5.14.x series.
Applications compiled for 5.14 will continue to run with 5.15.
Some of the changes listed in this file include issue tracking numbers
corresponding to tasks in the Qt Bug Tracker:
https://bugreports.qt.io/
Each of these identifiers can be entered in the bug tracker to obtain more
information about a particular change.
- This release contains only minor code improvements.
local/recipes/qt/qt6-sensors/source/dist/changes-5.2.0
Vendored
-71
View File
@@ -1,71 +0,0 @@
Qt 5.2 introduces many new features and improvements as well as bugfixes
over the 5.1.x series. For more details, refer to the online documentation
included in this distribution. The documentation is also available online:
http://qt-project.org/doc/qt-5.2
The Qt version 5.2 series is binary compatible with the 5.1.x series.
Applications compiled for 5.1 will continue to run with 5.2.
Some of the changes listed in this file include issue tracking numbers
corresponding to tasks in the Qt Bug Tracker:
http://bugreports.qt-project.org/
Each of these identifiers can be entered in the bug tracker to obtain more
information about a particular change.
****************************************************************************
* General *
****************************************************************************
General Improvements
--------------------
Third party components
----------------------
****************************************************************************
* Important Behavior Changes *
****************************************************************************
****************************************************************************
* Library *
****************************************************************************
QtSensors
------
- QAmbientTemperaturSensor, QPressureSensor and QProximitySensor have been
implemented on Android.
- Various documentation and example improvements have been made.
- QTBUG-34050: The sensorfw plugin can handle the restart of sensord
****************************************************************************
* Database Drivers *
****************************************************************************
****************************************************************************
* Platform Specific Changes *
****************************************************************************
****************************************************************************
* Compiler Specific Changes *
****************************************************************************
****************************************************************************
* Tools *
****************************************************************************
****************************************************************************
* Plugins *
****************************************************************************
- QTBUG-34050: The sensorfw plugin can handle the restart of sensord.
- The sensor plugin for Blackberry has received a variety of bug fixes.
local/recipes/qt/qt6-sensors/source/dist/changes-5.3.0
Vendored
-67
View File
@@ -1,67 +0,0 @@
Qt 5.3 introduces many new features and improvements as well as bugfixes
over the 5.2.x series. For more details, refer to the online documentation
included in this distribution. The documentation is also available online:
http://qt-project.org/doc/qt-5.3
The Qt version 5.3 series is binary compatible with the 5.2.x series.
Applications compiled for 5.2 will continue to run with 5.3.
Some of the changes listed in this file include issue tracking numbers
corresponding to tasks in the Qt Bug Tracker:
http://bugreports.qt-project.org/
Each of these identifiers can be entered in the bug tracker to obtain more
information about a particular change.
****************************************************************************
* General *
****************************************************************************
General Improvements
--------------------
- The general documentation has been improved.
- The Accelbubble example was adjusted to suppress dynamic user interface
rotation which avoids the rotation of the UI itself when running the
example.
****************************************************************************
* Library *
****************************************************************************
QtSensors
-------------
- Various fixes to plug-ins and examples to simplify usage when using
static linking.
****************************************************************************
* Platform Specific Changes *
****************************************************************************
Android
-------
- QAccelerometer's accellerationMode implemented.
- Fixed deployment of examples to Android targets.
BlackBerry
----------
- QProximitySensor
* The close detection algorithm fixed on sensors whose output is not binary.
iOS
---
- Improved handling of NaN across all sensor implementations.
WinRT
-----
- QtSensors has been ported to WinRT/Windows Phone
local/recipes/qt/qt6-sensors/source/dist/changes-5.3.1
Vendored
-44
View File
@@ -1,44 +0,0 @@
Qt 5.3.1 is a bug-fix release. It maintains both forward and backward
compatibility (source and binary) with Qt 5.3.0.
For more details, refer to the online documentation included in this
distribution. The documentation is also available online:
http://qt-project.org/doc/qt-5.3
The Qt version 5.3 series is binary compatible with the 5.2.x series.
Applications compiled for 5.2 will continue to run with 5.3.
Some of the changes listed in this file include issue tracking numbers
corresponding to tasks in the Qt Bug Tracker:
http://bugreports.qt-project.org/
Each of these identifiers can be entered in the bug tracker to obtain more
information about a particular change.
****************************************************************************
* Library *
****************************************************************************
QtSensors
---------
- [QTBUG-38224] Fixed usage of wrong directory separator by some sensor
examples.
****************************************************************************
* Platform Specific Changes *
****************************************************************************
Android
-------
- [QTBUG-39335] Fixed crash when accelerationMode was set to Gravity
Windows
-------
- [QTBUG-39698] Fixed crash when trying to access the sensors on a desktop
rather than mobile platforms.
local/recipes/qt/qt6-sensors/source/dist/changes-5.3.2
Vendored
-41
View File
@@ -1,41 +0,0 @@
Qt 5.3.2 is a bug-fix release. It maintains both forward and backward
compatibility (source and binary) with Qt 5.3.0 and Qt 5.3.1.
For more details, refer to the online documentation included in this
distribution. The documentation is also available online:
http://qt-project.org/doc/qt-5.3
The Qt version 5.3 series is binary compatible with the 5.2.x series.
Applications compiled for 5.2 will continue to run with 5.3.
Some of the changes listed in this file include issue tracking numbers
corresponding to tasks in the Qt Bug Tracker:
http://bugreports.qt-project.org/
Each of these identifiers can be entered in the bug tracker to obtain more
information about a particular change.
****************************************************************************
* Library *
****************************************************************************
QtSensors
---------
- QCompass documentation improved.
****************************************************************************
* Platform Specific Changes *
****************************************************************************
Linux
-----
- [sensorfw] Fixed incomplete initialization after restarting sensord.
- [sensorfw] Improved debugging and tracing capabilities
- [sensorfw] Added more checks to be more tolerant in case of errors or
corner cases.
- [sensorfw] Minor code cleanups
local/recipes/qt/qt6-sensors/source/dist/changes-5.4.0
Vendored
-48
View File
@@ -1,48 +0,0 @@
Qt 5.4 introduces many new features and improvements as well as bugfixes
over the 5.3.x series. For more details, refer to the online documentation
included in this distribution. The documentation is also available online:
http://qt-project.org/doc/qt-5.4
The Qt version 5.4 series is binary compatible with the 5.3.x series.
Applications compiled for 5.3 will continue to run with 5.4.
Some of the changes listed in this file include issue tracking numbers
corresponding to tasks in the Qt Bug Tracker:
http://bugreports.qt-project.org/
Each of these identifiers can be entered in the bug tracker to obtain more
information about a particular change.
****************************************************************************
* Library *
****************************************************************************
QtSensors
---------
- QDistanceSensor class added.
* Currently only implemented on BlackBerry.
- Some minor documentation fixes added.
- [QTBUG-31076] Maze example improved.
- [QTBUG-31076] Cube example removed.
****************************************************************************
* Platform Specific Changes *
****************************************************************************
Android
-------
- Compass sensor implementation added.
WinRT
-----
- Ambient light and orientation sensor implementation added.
- [QTBUG-40664] Data rates for all sensors set to 1Hz.
- Fixed crash due to divide by zero.
local/recipes/qt/qt6-sensors/source/dist/changes-5.4.1
Vendored
-39
View File
@@ -1,39 +0,0 @@
Qt 5.4.1 is a bug-fix release. It maintains both forward and backward
compatibility (source and binary) with Qt 5.4.0.
For more details, refer to the online documentation included in this
distribution. The documentation is also available online:
http://doc.qt.io/qt-5.4
The Qt version 5.4 series is binary compatible with the 5.3.x series.
Applications compiled for 5.3 will continue to run with 5.4.
Some of the changes listed in this file include issue tracking numbers
corresponding to tasks in the Qt Bug Tracker:
http://bugreports.qt.io/
Each of these identifiers can be entered in the bug tracker to obtain more
information about a particular change.
****************************************************************************
* Library *
****************************************************************************
QtSensors
-----------
- General:
* Fixed minor documentation issues.
****************************************************************************
* Platform Specific Changes *
****************************************************************************
Linux
-----
- [QTBUG-39475] Changed loading of dummy sensor plug-in. The dummy plug-in
is no longer needed on Linux as the generic and Linux specific sensor
can be used.
local/recipes/qt/qt6-sensors/source/dist/changes-5.4.2
Vendored
-29
View File
@@ -1,29 +0,0 @@
Qt 5.4.2 is a bug-fix release. It maintains both forward and backward
compatibility (source and binary) with Qt 5.4.0 and Qt 5.4.1.
For more details, refer to the online documentation included in this
distribution. The documentation is also available online:
http://doc.qt.io/qt-5.4
The Qt version 5.4 series is binary compatible with the 5.3.x series.
Applications compiled for 5.3 will continue to run with 5.4.
Some of the changes listed in this file include issue tracking numbers
corresponding to tasks in the Qt Bug Tracker:
http://bugreports.qt.io/
Each of these identifiers can be entered in the bug tracker to obtain more
information about a particular change.
****************************************************************************
* Library *
****************************************************************************
QtSensors
-----------
- Fixed minor documentation issues.
- Added AlwaysOn support for sensorfw backend.
- Fixed crash in QtSensors if sensorfwd is not running.
local/recipes/qt/qt6-sensors/source/dist/changes-5.5.0
Vendored
-30
View File
@@ -1,30 +0,0 @@
Qt 5.5 introduces many new features and improvements as well as bugfixes
over the 5.4.x series. For more details, refer to the online documentation
included in this distribution. The documentation is also available online:
http://doc.qt.io/qt-5/index.html
The Qt version 5.5 series is binary compatible with the 5.4.x series.
Applications compiled for 5.4 will continue to run with 5.5.
Some of the changes listed in this file include issue tracking numbers
corresponding to tasks in the Qt Bug Tracker:
https://bugreports.qt.io/
Each of these identifiers can be entered in the bug tracker to obtain more
information about a particular change.
****************************************************************************
* Library *
****************************************************************************
QtSensors
---------
- Removed BlackBerry Playbook support
- [QTBUG-45691] Fixed crash in Android Compass code
- Added iPhone6/6+ support to accelbubble example
- Fixed QNX 6.6 build
- [QTBUG-45516] Fixed restarting behavior of sensorfw
local/recipes/qt/qt6-sensors/source/dist/changes-5.5.1
Vendored
-32
View File
@@ -1,32 +0,0 @@
Qt 5.5.1 is a bug-fix release. It maintains both forward and backward
compatibility (source and binary) with Qt 5.5.0.
For more details, refer to the online documentation included in this
distribution. The documentation is also available online:
http://doc.qt.io/qt-5.5/
The Qt version 5.5 series is binary compatible with the 5.4.x series.
Applications compiled for 5.4 will continue to run with 5.5.
Some of the changes listed in this file include issue tracking numbers
corresponding to tasks in the Qt Bug Tracker:
http://bugreports.qt.io/
Each of these identifiers can be entered in the bug tracker to obtain more
information about a particular change.
****************************************************************************
* Library *
****************************************************************************
****************************************************************************
* Platform Specific Changes *
****************************************************************************
Sensor Framework platforms
--------------------------
- [QTBUG-47854] Fixed interaction between generic and sensorfw plugin.
local/recipes/qt/qt6-sensors/source/dist/changes-5.6.0
Vendored
-27
View File
@@ -1,27 +0,0 @@
Qt 5.6 introduces many new features and improvements as well as bugfixes
over the 5.5.x series. For more details, refer to the online documentation
included in this distribution. The documentation is also available online:
http://doc.qt.io/qt-5/index.html
The Qt version 5.6 series is binary compatible with the 5.5.x series.
Applications compiled for 5.5 will continue to run with 5.6.
Some of the changes listed in this file include issue tracking numbers
corresponding to tasks in the Qt Bug Tracker:
https://bugreports.qt.io/
Each of these identifiers can be entered in the bug tracker to obtain more
information about a particular change.
****************************************************************************
* Library *
****************************************************************************
QtSensors
---------
- Fixed minor documentation issues.
- Improved various examples
- [QTBUG-49741] Fixed hanging WinRT sensor plugin.
local/recipes/qt/qt6-sensors/source/dist/changes-5.6.1
Vendored
-29
View File
@@ -1,29 +0,0 @@
Qt 5.6.1 is a bug-fix release. It maintains both forward and backward
compatibility (source and binary) with Qt 5.6.0.
For more details, refer to the online documentation included in this
distribution. The documentation is also available online:
http://doc.qt.io/qt-5.6/
The Qt version 5.6 series is binary compatible with the 5.5.x series.
Applications compiled for 5.5 will continue to run with 5.6.
Some of the changes listed in this file include issue tracking numbers
corresponding to tasks in the Qt Bug Tracker:
http://bugreports.qt.io/
Each of these identifiers can be entered in the bug tracker to obtain more
information about a particular change.
****************************************************************************
* Library *
****************************************************************************
QtSensors
---------
- Fixed a few documentation issues
- Reduced size of PNGs in documentation and examples
- Cleaned up various project files across the module
local/recipes/qt/qt6-sensors/source/dist/changes-5.6.2
Vendored
-33
View File
@@ -1,33 +0,0 @@
Qt 5.6.2 is a bug-fix release. It maintains both forward and backward
compatibility (source and binary) with Qt 5.6.0.
For more details, refer to the online documentation included in this
distribution. The documentation is also available online:
http://doc.qt.io/qt-5/index.html
The Qt version 5.6 series is binary compatible with the 5.5.x series.
Applications compiled for 5.5 will continue to run with 5.6.
Some of the changes listed in this file include issue tracking numbers
corresponding to tasks in the Qt Bug Tracker:
https://bugreports.qt.io/
Each of these identifiers can be entered in the bug tracker to obtain more
information about a particular change.
****************************************************************************
* Library *
****************************************************************************
QtSensors
---------
- Fixed multi client stopping issues on iOS
- Fixed iOS compass calibration level reading
- Fixed Android JNI_OnLoad issue
- Fixed build on OpenBSD
- Fixed initialization issue on a Sensor Gesture
local/recipes/qt/qt6-sensors/source/dist/changes-5.6.3
Vendored
-29
View File
@@ -1,29 +0,0 @@
Qt 5.6.3 is a bug-fix release. It maintains both forward and backward
compatibility (source and binary) with Qt 5.6.0.
For more details, refer to the online documentation included in this
distribution. The documentation is also available online:
http://doc.qt.io/qt-5/index.html
The Qt version 5.6 series is binary compatible with the 5.5.x series.
Applications compiled for 5.5 will continue to run with 5.6.
Some of the changes listed in this file include issue tracking numbers
corresponding to tasks in the Qt Bug Tracker:
https://bugreports.qt.io/
Each of these identifiers can be entered in the bug tracker to obtain more
information about a particular change.
****************************************************************************
* Library *
****************************************************************************
QtSensors
---------
- [QTBUG-57184] Fixed incorrect accuracy levels of QMagnetometer on Android.
- Improved QMagnetometerReading documentation (broken link)
local/recipes/qt/qt6-sensors/source/dist/changes-5.7.0
Vendored
-42
View File
@@ -1,42 +0,0 @@
Qt 5.7 introduces many new features and improvements as well as bugfixes
over the 5.6.x series. Also, there is a change in the licensing terms.
For more details, refer to the online documentation included in this
distribution. The documentation is also available online:
http://doc.qt.io/qt-5/index.html
The Qt version 5.7 series is binary compatible with the 5.6.x series.
Applications compiled for 5.6 will continue to run with 5.7.
Some of the changes listed in this file include issue tracking numbers
corresponding to tasks in the Qt Bug Tracker:
https://bugreports.qt.io/
Each of these identifiers can be entered in the bug tracker to obtain more
information about a particular change.
****************************************************************************
* Important License Changes *
****************************************************************************
This module is no longer available under LGPLv2.1. The libraries are
now available under the following licenses:
* Commercial License
* GNU General Public License v2.0 (LICENSE.GPL2) and later
* GNU Lesser General Public License v3.0 (LICENSE.LGPL3)
The tools are now available under the following licenses:
* Commercial License
* GNU General Public License 3.0 (LICENSE.GPL3) with exceptions
described in The Qt Company GPL Exception 1.0 (LICENSE.GPL3-EXCEPT)
****************************************************************************
* Library *
****************************************************************************
QtSensors
---------
- Added support for iio-sensor-proxy. For more details see
https://github.com/hadess/iio-sensor-proxy.
local/recipes/qt/qt6-sensors/source/dist/changes-5.7.1
Vendored
-34
View File
@@ -1,34 +0,0 @@
Qt 5.7.1 is a bug-fix release. It maintains both forward and backward
compatibility (source and binary) with Qt 5.7.0.
For more details, refer to the online documentation included in this
distribution. The documentation is also available online:
http://doc.qt.io/qt-5/index.html
The Qt version 5.7 series is binary compatible with the 5.6.x series.
Applications compiled for 5.6 will continue to run with 5.7.
Some of the changes listed in this file include issue tracking numbers
corresponding to tasks in the Qt Bug Tracker:
https://bugreports.qt.io/
Each of these identifiers can be entered in the bug tracker to obtain more
information about a particular change.
****************************************************************************
* Library *
****************************************************************************
QtSensors
---------
- BC data files added
- [QTBUG-54506] Fixed unnecessary use of Activity objects where Context would be sufficient.
This fixes the use case of QtSensors working with Android services.
- Ensured that JNI_OnLoad is not called more than once on Android. This is a workaround for
https://code.google.com/p/android/issues/detail?id=215069.
- Fixed iOS compass calibration level reading
- Fixed multi client stopping issues on iOS
local/recipes/qt/qt6-sensors/source/dist/changes-5.8.0
Vendored
-41
View File
@@ -1,41 +0,0 @@
Qt 5.8 introduces many new features and improvements as well as bugfixes
over the 5.7.x series. For more details, refer to the online documentation
included in this distribution. The documentation is also available online:
http://doc.qt.io/qt-5/index.html
The Qt version 5.8 series is binary compatible with the 5.7.x series.
Applications compiled for 5.7 will continue to run with 5.8.
Some of the changes listed in this file include issue tracking numbers
corresponding to tasks in the Qt Bug Tracker:
https://bugreports.qt.io/
Each of these identifiers can be entered in the bug tracker to obtain more
information about a particular change.
****************************************************************************
* Library *
****************************************************************************
QtSensors
---------
- Converted Qt Sensors module to the new build system changes implied by
Qt Lite.
****************************************************************************
* Platform Specific Changes *
****************************************************************************
Android
-------
- [QTBUG-57184] Fixed incorrect accuracy levels for magnetometer.
iOS/macOS
---------
- Port the iOS sensors plugin to the other UIKit platforms
local/recipes/qt/qt6-sensors/source/dist/changes-5.9.0
Vendored
-32
View File
@@ -1,32 +0,0 @@
Qt 5.9 introduces many new features and improvements as well as bugfixes
over the 5.8.x series. For more details, refer to the online documentation
included in this distribution. The documentation is also available online:
http://doc.qt.io/qt-5/index.html
The Qt version 5.9 series is binary compatible with the 5.8.x series.
Applications compiled for 5.8 will continue to run with 5.9.
Some of the changes listed in this file include issue tracking numbers
corresponding to tasks in the Qt Bug Tracker:
https://bugreports.qt.io/
Each of these identifiers can be entered in the bug tracker to obtain more
information about a particular change.
****************************************************************************
* Library *
****************************************************************************
QtSensors
---------
- Added QLidSensor
- Added sensorfw backend for QLidSensor
General
-------
- QHumiditySensor:
* Added QHumiditySensor sensor API.
local/recipes/qt/qt6-sensors/source/dist/changes-5.9.1
Vendored
-26
View File
@@ -1,26 +0,0 @@
Qt 5.9.1 is a bug-fix release. It maintains both forward and backward
compatibility (source and binary) with Qt 5.9.0.
For more details, refer to the online documentation included in this
distribution. The documentation is also available online:
http://doc.qt.io/qt-5/index.html
The Qt version 5.9 series is binary compatible with the 5.8.x series.
Applications compiled for 5.8 will continue to run with 5.9.
Some of the changes listed in this file include issue tracking numbers
corresponding to tasks in the Qt Bug Tracker:
https://bugreports.qt.io/
Each of these identifiers can be entered in the bug tracker to obtain more
information about a particular change.
****************************************************************************
* Library *
****************************************************************************
- [QTBUG-60607] Updated sensor compatibility table to show UWP status.
- [QTBUG-56669] Fixed sensor explorer build on macOS.
- [QTBUG-33875] Fixed grue sensor example build on macOS.
local/recipes/qt/qt6-sensors/source/dist/changes-5.9.2
Vendored
-24
View File
@@ -1,24 +0,0 @@
Qt 5.9.2 is a bug-fix release. It maintains both forward and backward
compatibility (source and binary) with Qt 5.9.0.
For more details, refer to the online documentation included in this
distribution. The documentation is also available online:
http://doc.qt.io/qt-5/index.html
The Qt version 5.9 series is binary compatible with the 5.8.x series.
Applications compiled for 5.8 will continue to run with 5.9.
Some of the changes listed in this file include issue tracking numbers
corresponding to tasks in the Qt Bug Tracker:
https://bugreports.qt.io/
Each of these identifiers can be entered in the bug tracker to obtain more
information about a particular change.
****************************************************************************
* Qt 5.9.2 Changes *
****************************************************************************
- Use QDeadlineTimer to greatly simplify dummy plugin
local/recipes/qt/qt6-sensors/source/dist/changes-5.9.3
Vendored
-24
View File
@@ -1,24 +0,0 @@
Qt 5.9.3 is a bug-fix release. It maintains both forward and backward
compatibility (source and binary) with Qt 5.9.0.
For more details, refer to the online documentation included in this
distribution. The documentation is also available online:
http://doc.qt.io/qt-5/index.html
The Qt version 5.9 series is binary compatible with the 5.8.x series.
Applications compiled for 5.8 will continue to run with 5.9.
Some of the changes listed in this file include issue tracking numbers
corresponding to tasks in the Qt Bug Tracker:
https://bugreports.qt.io/
Each of these identifiers can be entered in the bug tracker to obtain more
information about a particular change.
****************************************************************************
* Qt 5.9.3 Changes *
****************************************************************************
- This release does not contain any changes to this module.
local/recipes/qt/qt6-sensors/source/dist/changes-5.9.4
Vendored
-25
View File
@@ -1,25 +0,0 @@
Qt 5.9.4 is a bug-fix release. It maintains both forward and backward
compatibility (source and binary) with Qt 5.9.0.
For more details, refer to the online documentation included in this
distribution. The documentation is also available online:
http://doc.qt.io/qt-5/index.html
The Qt version 5.9 series is binary compatible with the 5.8.x series.
Applications compiled for 5.8 will continue to run with 5.9.
Some of the changes listed in this file include issue tracking numbers
corresponding to tasks in the Qt Bug Tracker:
https://bugreports.qt.io/
Each of these identifiers can be entered in the bug tracker to obtain more
information about a particular change.
****************************************************************************
* Qt 5.9.4 Changes *
****************************************************************************
- This release does not contain any changes to this module.
local/recipes/qt/qt6-sensors/source/dist/changes-5.9.5
Vendored
-24
View File
@@ -1,24 +0,0 @@
Qt 5.9.5 is a bug-fix release. It maintains both forward and backward
compatibility (source and binary) with Qt 5.9.0.
For more details, refer to the online documentation included in this
distribution. The documentation is also available online:
http://doc.qt.io/qt-5/index.html
The Qt version 5.9 series is binary compatible with the 5.8.x series.
Applications compiled for 5.9 will continue to run with 5.9.
Some of the changes listed in this file include issue tracking numbers
corresponding to tasks in the Qt Bug Tracker:
https://bugreports.qt.io/
Each of these identifiers can be entered in the bug tracker to obtain more
information about a particular change.
****************************************************************************
* Qt 5.9.5 Changes *
****************************************************************************
- This release contains only minor code improvements.
local/recipes/qt/qt6-sensors/source/dist/changes-5.9.6
Vendored
-24
View File
@@ -1,24 +0,0 @@
Qt 5.9.6 is a bug-fix release. It maintains both forward and backward
compatibility (source and binary) with Qt 5.9.0 through 5.9.5.
For more details, refer to the online documentation included in this
distribution. The documentation is also available online:
http://doc.qt.io/qt-5/index.html
The Qt version 5.9 series is binary compatible with the 5.8.x series.
Applications compiled for 5.8 will continue to run with 5.9.
Some of the changes listed in this file include issue tracking numbers
corresponding to tasks in the Qt Bug Tracker:
https://bugreports.qt.io/
Each of these identifiers can be entered in the bug tracker to obtain more
information about a particular change.
****************************************************************************
* Qt 5.9.6 Changes *
****************************************************************************
- This release contains only minor code improvements.
local/recipes/qt/qt6-sensors/source/doc/src/sensors-dynamic.dia
BIN
View File
Binary file not shown.
local/recipes/qt/qt6-sensors/source/doc/src/sensors-overview.dia
BIN
View File
Binary file not shown.
local/recipes/qt/qt6-sensors/source/doc/src/sensors-static.dia
BIN
View File
Binary file not shown.
local/recipes/qt/qt6-sensors/source/examples/CMakeLists.txt
-8
View File
@@ -1,8 +0,0 @@
# Copyright (C) 2022 The Qt Company Ltd.
# SPDX-License-Identifier: LicenseRef-Qt-Commercial OR BSD-3-Clause
qt_examples_build_begin(EXTERNAL_BUILD)
add_subdirectory(sensors)
qt_examples_build_end()
local/recipes/qt/qt6-sensors/source/examples/examples.pro
-3
View File
@@ -1,3 +0,0 @@
TEMPLATE = subdirs
SUBDIRS += sensors
local/recipes/qt/qt6-sensors/source/examples/sensors/CMakeLists.txt
-6
View File
@@ -1,6 +0,0 @@
# Copyright (C) 2022 The Qt Company Ltd.
# SPDX-License-Identifier: LicenseRef-Qt-Commercial OR BSD-3-Clause
if(TARGET Qt::Quick AND TARGET Qt::Svg)
qt_internal_add_example(sensorsshowcase)
endif()
local/recipes/qt/qt6-sensors/source/examples/sensors/sensors.pro
-5
View File
@@ -1,5 +0,0 @@
TEMPLATE = subdirs
qtHaveModule(quick): qtHaveModule(svg): {
SUBDIRS += sensorsshowcase
}
local/recipes/qt/qt6-sensors/source/examples/sensors/sensorsshowcase/Accelerometer.qml
-70
View File
@@ -1,70 +0,0 @@
// Copyright (C) 2023 The Qt Company Ltd.
// SPDX-License-Identifier: LicenseRef-Qt-Commercial OR BSD-3-Clause
pragma ComponentBehavior: Bound
import QtQuick
import QtQuick.Layouts
import QtSensors
Item {
id: root
required property int fontSize
required property int imageSize
//! [0]
Accelerometer {
id: accelerometer
property real x: 0
property real y: 0
property real z: 0
active: true
dataRate: 25
onReadingChanged: {
x = (reading as AccelerometerReading).x
y = (reading as AccelerometerReading).y
z = (reading as AccelerometerReading).z
imageTranslation.x = -x * 10
imageTranslation.y = y * 10
}
}
//! [0]
ColumnLayout {
id: layout
anchors.fill: parent
spacing: 10
Image {
id: image
Layout.alignment: Qt.AlignCenter
Layout.preferredHeight: root.imageSize
Layout.preferredWidth: root.imageSize
fillMode: Image.PreserveAspectFit
source: "images/qt_logo.png"
transform: [
Translate {
id: imageTranslation
x: 0
y: 0
}
]
}
ProgressXYZBar {
Layout.fillWidth: true
fontSize: root.fontSize
xText: "X: " + accelerometer.x.toFixed(2)
xValue: 0.5 + (accelerometer.x / 100)
yText: "Y: " + accelerometer.y.toFixed(2)
yValue: 0.5 + (accelerometer.y / 100)
zText: "Z: " + accelerometer.z.toFixed(2)
zValue: 0.5 + (accelerometer.z / 100)
}
}
}
local/recipes/qt/qt6-sensors/source/examples/sensors/sensorsshowcase/CMakeLists.txt
-72
View File
@@ -1,72 +0,0 @@
# Copyright (C) 2023 The Qt Company Ltd.
# SPDX-License-Identifier: LicenseRef-Qt-Commercial OR BSD-3-Clause
cmake_minimum_required(VERSION 3.16)
project(sensorsshowcase LANGUAGES CXX)
if(NOT DEFINED INSTALL_EXAMPLESDIR)
set(INSTALL_EXAMPLESDIR "examples")
endif()
set(INSTALL_EXAMPLEDIR "${INSTALL_EXAMPLESDIR}/sensors/sensorsshowcase")
find_package(Qt6 REQUIRED COMPONENTS Core Gui Quick Svg Sensors)
qt_standard_project_setup(REQUIRES 6.5)
qt_add_executable(sensorsshowcase
main.cpp
)
set_target_properties(sensorsshowcase PROPERTIES
WIN32_EXECUTABLE TRUE
MACOSX_BUNDLE TRUE
)
if(ANDROID)
set_property(TARGET sensorsshowcase PROPERTY QT_ANDROID_PACKAGE_SOURCE_DIR
${CMAKE_CURRENT_SOURCE_DIR}/android)
endif()
if(APPLE AND IOS)
set_property(TARGET sensorsshowcase PROPERTY
MACOSX_BUNDLE_INFO_PLIST "${CMAKE_CURRENT_SOURCE_DIR}/Info.plist"
)
else()
# default search path for the config file is "qrc:/"
qt_add_resources(sensorsshowcase "resources"
FILES qtquickcontrols2.conf)
endif()
qt_add_qml_module(sensorsshowcase
URI SensorShowcaseModule
VERSION 1.0
QML_FILES
"Main.qml"
"Accelerometer.qml"
"Compass.qml"
"Gyroscope.qml"
"Magnetometer.qml"
"Proximity.qml"
"ProgressXYZBar.qml"
RESOURCES
"images/compass.svg"
"images/magnet.svg"
"images/qt_logo.png"
SOURCES
sensorsupport.h
)
target_link_libraries(sensorsshowcase
PRIVATE
Qt::Core
Qt::Gui
Qt::Quick
Qt::Svg
Qt::Sensors
)
install(TARGETS sensorsshowcase
RUNTIME DESTINATION "${INSTALL_EXAMPLEDIR}"
BUNDLE DESTINATION "${INSTALL_EXAMPLEDIR}"
LIBRARY DESTINATION "${INSTALL_EXAMPLEDIR}"
)
local/recipes/qt/qt6-sensors/source/examples/sensors/sensorsshowcase/Compass.qml
-61
View File
@@ -1,61 +0,0 @@
// Copyright (C) 2023 The Qt Company Ltd.
// SPDX-License-Identifier: LicenseRef-Qt-Commercial OR BSD-3-Clause
pragma ComponentBehavior: Bound
import QtQuick
import QtQuick.Layouts
import QtSensors
Item {
id: root
required property int fontSize
required property int imageSize
property alias isActive: compass.active
property real azimuth: 30
Compass {
id: compass
active: true
dataRate: 7
onReadingChanged: root.azimuth = -(reading as CompassReading).azimuth
}
ColumnLayout {
id: layout
anchors.fill: parent
spacing: 10
Image {
id: arrow
Layout.alignment: Qt.AlignHCenter
Layout.preferredWidth: root.imageSize * 1.25
Layout.fillHeight: true
source: "images/compass.svg"
fillMode: Image.PreserveAspectFit
rotation: root.azimuth
}
Rectangle {
id: separator
Layout.topMargin: 10
Layout.preferredWidth: parent.width * 0.75
Layout.preferredHeight: 1
Layout.alignment: Qt.AlignHCenter
color: "black"
}
Text {
id: info
Layout.fillWidth: true
Layout.fillHeight: true
Layout.topMargin: 10
text: "Azimuth: " + root.azimuth.toFixed(2) + "°"
font.pixelSize: root.fontSize
}
}
}
local/recipes/qt/qt6-sensors/source/examples/sensors/sensorsshowcase/Gyroscope.qml
-128
View File
@@ -1,128 +0,0 @@
// Copyright (C) 2023 The Qt Company Ltd.
// SPDX-License-Identifier: LicenseRef-Qt-Commercial OR BSD-3-Clause
pragma ComponentBehavior: Bound
import QtQuick
import QtQuick.Controls
import QtQuick.Layouts
import QtSensors
Item {
id: root
required property int fontSize
required property int imageSize
function resetRotations() : void
{
imageXRotation.angle = 0
imageYRotation.angle = 0
imageZRotation.angle = 0
}
//! [0]
Gyroscope {
id: gyroscope
property var lastTimeStamp: 0
property real x: 0
property real y: 0
property real z: 0
active: true
dataRate: 25
onReadingChanged: {
x = (reading as GyroscopeReading).x
y = (reading as GyroscopeReading).y
z = (reading as GyroscopeReading).z
let firstCall = false
if (lastTimeStamp == 0) {
firstCall = true
}
let timeSinceLast = reading.timestamp - lastTimeStamp
lastTimeStamp = reading.timestamp
//Skipping the initial time jump from 0
if (firstCall === true)
return
let normalizedX = x * (timeSinceLast / 1000000)
imageXRotation.angle += normalizedX
let normalizedY = y * (timeSinceLast / 1000000)
imageYRotation.angle -= normalizedY
let normalizedZ = z * (timeSinceLast / 1000000)
imageZRotation.angle += normalizedZ
}
}
//! [0]
ColumnLayout {
id: layout
anchors.fill: parent
spacing: 10
Image {
id: image
Layout.alignment: Qt.AlignHCenter
Layout.fillHeight: true
Layout.preferredWidth: root.imageSize
fillMode: Image.PreserveAspectFit
source: "images/qt_logo.png"
transform: [
Rotation {
id: imageXRotation
angle: 0
axis.x: 1
axis.y: 0
axis.z: 0
origin.x: layout.width / 2
origin.y: layout.height / 3
},
Rotation {
id: imageYRotation
angle: 0
axis.x: 0
axis.y: 1
axis.z: 0
origin.x: layout.width / 2
origin.y: layout.height / 3
},
Rotation {
id: imageZRotation
angle: 0
axis.x: 0
axis.y: 0
axis.z: 1
origin.x: layout.width / 2
origin.y: layout.height / 3
}
]
}
ProgressXYZBar {
Layout.fillWidth: true
Layout.topMargin: 20
fontSize: root.fontSize
xText: "X: " + gyroscope.x.toFixed(2)
xValue: 0.5 + (gyroscope.x / 1000)
yText: "Y: " + gyroscope.y.toFixed(2)
yValue: 0.5 + (gyroscope.y / 1000)
zText: "Z: " + gyroscope.z.toFixed(2)
zValue: 0.5 + (gyroscope.z / 1000)
}
Button {
Layout.alignment: Qt.AlignHCenter
Layout.topMargin: 20
Layout.bottomMargin: 10
Layout.preferredWidth: parent.width / 2
Layout.preferredHeight: 60
onClicked: root.resetRotations()
text: "Reset rotation"
}
}
}
local/recipes/qt/qt6-sensors/source/examples/sensors/sensorsshowcase/Info.plist
-32
View File
@@ -1,32 +0,0 @@
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>CFBundleDisplayName</key>
<string>sensorsshowcase</string>
<key>CFBundleExecutable</key>
<string>sensorsshowcase</string>
<key>CFBundleGetInfoString</key>
<string>Created by Qt/QMake</string>
<key>CFBundleIdentifier</key>
<string>com.qt.sensorsshowcase</string>
<key>CFBundleName</key>
<string>sensorsshowcase</string>
<key>CFBundlePackageType</key>
<string>APPL</string>
<key>CFBundleShortVersionString</key>
<string>1.0</string>
<key>CFBundleSignature</key>
<string>????</string>
<key>CFBundleVersion</key>
<string>1.0</string>
<key>LSRequiresIPhoneOS</key>
<true/>
<key>UILaunchStoryboardName</key>
<string>LaunchScreen</string>
<key>UISupportedInterfaceOrientations</key>
<array>
<string>UIInterfaceOrientationPortrait</string>
</array>
</dict>
</plist>
local/recipes/qt/qt6-sensors/source/examples/sensors/sensorsshowcase/Magnetometer.qml
-68
View File
@@ -1,68 +0,0 @@
// Copyright (C) 2023 The Qt Company Ltd.
// SPDX-License-Identifier: LicenseRef-Qt-Commercial OR BSD-3-Clause
pragma ComponentBehavior: Bound
import QtQuick
import QtQuick.Layouts
import QtSensors
Item {
id: root
required property int fontSize
required property int imageSize
property real magnetRotation: 40
property real magnetometerX: 0
property real magnetometerY: 0
property real magnetometerZ: 0
property int barScaleFactor: 10000
//! [0]
Magnetometer {
id: magnetometer
active: true
dataRate: 25
onReadingChanged: {
root.magnetometerX = (reading as MagnetometerReading).x
root.magnetometerY = (reading as MagnetometerReading).y
root.magnetometerZ = (reading as MagnetometerReading).z
root.magnetRotation =
((Math.atan2(root.magnetometerX, root.magnetometerY) / Math.PI) * 180)
}
}
//! [0]
ColumnLayout {
id: layout
anchors.fill: parent
spacing: 10
Image {
id: image
Layout.alignment: Qt.AlignHCenter
Layout.bottomMargin: 20
Layout.preferredWidth: root.imageSize * 0.9
Layout.preferredHeight: root.imageSize * 0.9
source: "images/magnet.svg"
fillMode: Image.PreserveAspectFit
rotation: root.magnetRotation
}
ProgressXYZBar {
Layout.fillWidth: true
fontSize: root.fontSize
xText: "X: " + root.magnetometerX.toFixed(9)
xValue: 0.5 + (root.magnetometerX * root.barScaleFactor)
yText: "Y: " + root.magnetometerY.toFixed(9)
yValue: 0.5 + (root.magnetometerY * root.barScaleFactor)
zText: "Z: " + root.magnetometerZ.toFixed(9)
zValue: 0.5 + (root.magnetometerZ * root.barScaleFactor)
}
}
}
local/recipes/qt/qt6-sensors/source/examples/sensors/sensorsshowcase/Main.qml
-116
View File
@@ -1,116 +0,0 @@
// Copyright (C) 2023 The Qt Company Ltd.
// SPDX-License-Identifier: LicenseRef-Qt-Commercial OR BSD-3-Clause
pragma ComponentBehavior: Bound
import QtQuick
import QtQuick.Controls
import QtQuick.Layouts
ApplicationWindow {
id: root
readonly property int defaultFontSize: 22
readonly property int imageSize: width / 2
width: 420
height: 760
visible: true
title: "Sensors Showcase"
header : ToolBar {
RowLayout {
anchors.fill: parent
anchors.leftMargin: 10
anchors.rightMargin: 10
ToolButton {
id: back
text: qsTr("Back")
font.pixelSize: root.defaultFontSize - 4
visible: stack.depth > 1
onClicked: {
stack.pop();
heading.text = root.title;
}
Layout.alignment: Qt.AlignLeft
}
Label {
id: heading
text: root.title
font.pixelSize: root.defaultFontSize
font.weight: Font.Medium
verticalAlignment: Qt.AlignVCenter
Layout.alignment: Qt.AlignCenter
Layout.preferredHeight: 55
}
Item {
visible: back.visible
Layout.preferredWidth: back.width
}
}
}
StackView {
id: stack
// Pushes the object and forwards the properties
function pusher(object : string) : void {
// Trim the suffix and set it as new heading
heading.text = object.split(".")[0]
return stack.push(object, {
fontSize: root.defaultFontSize,
imageSize: root.imageSize
})
}
anchors.fill: parent
anchors.margins: width / 12
initialItem: Item {
ColumnLayout {
id: initialItem
anchors.fill: parent
anchors.topMargin: 20
anchors.bottomMargin: 20
spacing: 5
component CustomButton: Button {
highlighted: true
font.pixelSize: root.defaultFontSize
font.letterSpacing: 1.5
Layout.alignment: Qt.AlignCenter
Layout.fillHeight: true
Layout.fillWidth: true
}
CustomButton {
text: "Accelerometer"
onClicked: stack.pusher("Accelerometer.qml")
enabled: SensorSupport.hasAccelerometer()
}
CustomButton {
text: "Proximity"
onClicked: stack.pusher("Proximity.qml")
enabled: SensorSupport.hasProximity()
}
CustomButton {
text: "Compass"
onClicked: stack.pusher("Compass.qml")
enabled: SensorSupport.hasCompass()
}
CustomButton {
text: "Magnetometer"
onClicked: stack.pusher("Magnetometer.qml")
enabled: SensorSupport.hasMagnetometer()
}
CustomButton {
text: "Gyroscope"
onClicked: stack.pusher("Gyroscope.qml")
enabled: SensorSupport.hasGyroscope()
}
}
}
}
}
local/recipes/qt/qt6-sensors/source/examples/sensors/sensorsshowcase/ProgressXYZBar.qml
-45
View File
@@ -1,45 +0,0 @@
// Copyright (C) 2023 The Qt Company Ltd.
// SPDX-License-Identifier: LicenseRef-Qt-Commercial OR BSD-3-Clause
pragma ComponentBehavior: Bound
import QtQuick
import QtQuick.Controls
import QtQuick.Layouts
ColumnLayout {
id: root
spacing: 0
required property int fontSize
property alias xText: xBar.text
property alias xValue: xBar.value
property alias yText: yBar.text
property alias yValue: yBar.value
property alias zText: zBar.text
property alias zValue: zBar.value
component NamedProgressBar: ColumnLayout {
property alias text: axes.text
property alias value: bar.value
Text {
id: axes
font.pixelSize: root.fontSize
Layout.fillWidth: true
}
ProgressBar {
id: bar
Layout.fillWidth: true
}
}
NamedProgressBar {
id: xBar
}
NamedProgressBar {
id: yBar
}
NamedProgressBar {
id: zBar
}
}
local/recipes/qt/qt6-sensors/source/examples/sensors/sensorsshowcase/Proximity.qml
-55
View File
@@ -1,55 +0,0 @@
// Copyright (C) 2023 The Qt Company Ltd.
// SPDX-License-Identifier: LicenseRef-Qt-Commercial OR BSD-3-Clause
pragma ComponentBehavior: Bound
import QtQuick
import QtQuick.Layouts
import QtSensors
Item {
id: root
required property int imageSize
required property int fontSize
property bool near: false
ProximitySensor {
id: proximity
onReadingChanged: root.near = (reading as ProximityReading).near
active: true
}
ColumnLayout {
id: layout
anchors.fill: parent
spacing: 10
Image {
id: image
Layout.alignment: Qt.AlignHCenter
Layout.preferredWidth: root.near ? root.imageSize : root.imageSize * 0.75
Layout.fillHeight: true
source: "images/qt_logo.png"
fillMode: Image.PreserveAspectFit
}
Rectangle {
id: separator
Layout.topMargin: 10
Layout.bottomMargin: 10
Layout.preferredWidth: parent.width * 0.75
Layout.preferredHeight: 1
Layout.alignment: Qt.AlignHCenter
color: "black"
}
Text {
Layout.fillHeight: true
font.pixelSize: root.fontSize
text: "Near: " + root.near
}
}
}
local/recipes/qt/qt6-sensors/source/examples/sensors/sensorsshowcase/android/AndroidManifest.xml
-57
View File
@@ -1,57 +0,0 @@
<?xml version="1.0"?>
<manifest xmlns:android="http://schemas.android.com/apk/res/android"
package="org.qtproject.example.sensorsshowcase"
android:installLocation="auto"
android:versionCode="1"
android:versionName="1.0">
<!-- The comment below will be replaced with dependencies permissions upon deployment.
Remove the comment if you do not require these default permissions. -->
<!-- %%INSERT_PERMISSIONS -->
<!-- The comment below will be replaced with dependencies permissions upon deployment.
Remove the comment if you do not require these default features. -->
<!-- %%INSERT_FEATURES -->
<supports-screens
android:anyDensity="true"
android:largeScreens="true"
android:normalScreens="true"
android:smallScreens="true" />
<application
android:name="org.qtproject.qt.android.bindings.QtApplication"
android:extractNativeLibs="true"
android:hardwareAccelerated="true"
android:label="-- %%INSERT_APP_NAME%% --"
android:requestLegacyExternalStorage="true"
android:allowNativeHeapPointerTagging="false"
android:allowBackup="true"
android:fullBackupOnly="false"
android:icon="@drawable/icon">
<activity
android:name="org.qtproject.qt.android.bindings.QtActivity"
android:configChanges="orientation|uiMode|screenLayout|screenSize|smallestScreenSize|layoutDirection|locale|fontScale|keyboard|keyboardHidden|navigation|mcc|mnc|density"
android:label="-- %%INSERT_APP_NAME%% --"
android:launchMode="singleTop"
android:screenOrientation="portrait"
android:exported="true">
<intent-filter>
<action android:name="android.intent.action.MAIN" />
<category android:name="android.intent.category.LAUNCHER" />
</intent-filter>
<meta-data
android:name="android.app.lib_name"
android:value="-- %%INSERT_APP_LIB_NAME%% --" />
<meta-data android:name="android.app.arguments"
android:value="" />
<meta-data
android:name="android.app.extract_android_style"
android:value="minimal" />
<meta-data
android:name="android.app.background_running"
android:value="false" />
</activity>
</application>
</manifest>
local/recipes/qt/qt6-sensors/source/examples/sensors/sensorsshowcase/android/res/drawable-hdpi/icon.png
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 1.3 KiB

local/recipes/qt/qt6-sensors/source/examples/sensors/sensorsshowcase/android/res/drawable-ldpi/icon.png
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 578 B

local/recipes/qt/qt6-sensors/source/examples/sensors/sensorsshowcase/android/res/drawable-mdpi/icon.png
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 962 B

local/recipes/qt/qt6-sensors/source/examples/sensors/sensorsshowcase/android/res/drawable-xhdpi/icon.png
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 1.9 KiB

local/recipes/qt/qt6-sensors/source/examples/sensors/sensorsshowcase/android/res/drawable-xxhdpi/icon.png
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 3.0 KiB

local/recipes/qt/qt6-sensors/source/examples/sensors/sensorsshowcase/android/res/drawable-xxxhdpi/icon.png
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 4.2 KiB

local/recipes/qt/qt6-sensors/source/examples/sensors/sensorsshowcase/doc/images/sensorsshowcase-gyroscope.webp
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 12 KiB

local/recipes/qt/qt6-sensors/source/examples/sensors/sensorsshowcase/doc/images/sensorsshowcase-mainview.webp
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 16 KiB

local/recipes/qt/qt6-sensors/source/examples/sensors/sensorsshowcase/doc/src/sensorsshowcase.qdoc
-78
View File
@@ -1,78 +0,0 @@
// Copyright (C) 2023 The Qt Company Ltd.
// SPDX-License-Identifier: LicenseRef-Qt-Commercial OR GFDL-1.3-no-invariants-only
/*!
\example sensorsshowcase
\title Sensors Showcase
\brief The Sensors Showcase example demonstrates sensor usage with visual examples.
\meta tag {sensors,quick,mobile}
\ingroup qtsensors-examples
\examplecategory {Mobile}
\image sensorsshowcase-mainview.webp
\section1 Overview
On startup, the application shows a menu with buttons for the subviews for each sensor.
The sensor views instantiate the given sensor, display the sensor's values as numbers,
and also visualize them with a simple graphical representation.
\section1 Main Menu
The main view shows the title with the name of the application and a button
for each subview laid out evenly by a \c ColumnLayout. A \c StackView
manages the navigation between the subviews and the main menu. The
application checks the availability of the sensors during startup and
disables the buttons for the sensors that are not available.
\note To simplify the example, the sensor availability is checked only once
during the startup.
\section1 Accelerometer View
The accelerometer view shows the current device acceleration values and moves around
an image with an amount that is opposite of the device acceleration giving the image
an inertia effect that is proportional with the movement of the device.
Moving around the image happens in the accelerometer \c onReadingChanged method.
\snippet sensorsshowcase/Accelerometer.qml 0
Whenever there is a new accelerometer value the image translation coordinates are
updated accordingly.
\section1 Proximity View
The proximity view shows an image that is enlarged whenever the proximity sensor of
the device is covered.
\section1 Compass View
The compass view shows a compass image that is rotated according to the Compass sensor
reading value making the compass turn towards north.
\section1 Magnetometer View
The magnetometer view displays a magnet image that is rotated around an amount that is
decided by the rotation angle of the vector given by the x and y magnetometer values.
This results in general in the same rotation as the compass gives, demonstrating one use
case of how the magnetometer readings can be used. Since the magnetometer provides
readings along all three axes, there is more freedom with how these readings can be used.
\snippet sensorsshowcase/Magnetometer.qml 0
\section1 Gyroscope View
\image sensorsshowcase-gyroscope.webp
The gyroscope view also shows an image that is rotated around three axes with an amount
that is calculated from the gyroscope readings. Since the gyroscope provides relative
rotational change around the three spatial axes and the time between reading updates
can vary, the time of the readings are stored and the rotational change is normalized
based on the time passed between reading updates.
\snippet sensorsshowcase/Gyroscope.qml 0
By pressing the reset button the image rotation is reset to 0.
*/
local/recipes/qt/qt6-sensors/source/examples/sensors/sensorsshowcase/images/compass.svg
-222
View File
@@ -1,222 +0,0 @@
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<!-- Created with Inkscape (http://www.inkscape.org/) -->
<svg
width="123.29776mm"
height="123.29776mm"
viewBox="0 0 123.29776 123.29776"
version="1.1"
id="svg5"
inkscape:version="1.1.1 (3bf5ae0d25, 2021-09-20)"
sodipodi:docname="compass.svg"
xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
xmlns="http://www.w3.org/2000/svg"
xmlns:svg="http://www.w3.org/2000/svg">
<sodipodi:namedview
id="namedview7"
pagecolor="#ffffff"
bordercolor="#666666"
borderopacity="1.0"
inkscape:pageshadow="2"
inkscape:pageopacity="0.0"
inkscape:pagecheckerboard="0"
inkscape:document-units="mm"
showgrid="false"
showborder="true"
inkscape:zoom="1.5554293"
inkscape:cx="118.61677"
inkscape:cy="123.76005"
inkscape:window-width="2560"
inkscape:window-height="1377"
inkscape:window-x="1912"
inkscape:window-y="72"
inkscape:window-maximized="1"
inkscape:current-layer="layer1"
lock-margins="true"
fit-margin-top="15"
fit-margin-left="15"
fit-margin-right="15"
fit-margin-bottom="15" />
<defs
id="defs2" />
<g
inkscape:groupmode="layer"
id="layer2"
inkscape:label="Layer 2"
style="display:inline"
transform="translate(7.215891,-13.196477)">
<path
sodipodi:type="star"
style="fill:#000000;fill-opacity:1;stroke:none;stroke-width:1.88976;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
id="path2691"
inkscape:flatsided="false"
sodipodi:sides="4"
sodipodi:cx="131.1535"
sodipodi:cy="547.11584"
sodipodi:r1="75.011292"
sodipodi:r2="15.353019"
sodipodi:arg1="0.77933767"
sodipodi:arg2="1.5647358"
inkscape:rounded="0"
inkscape:randomized="0"
d="m 184.51497,599.83441 -53.26842,-37.36583 -52.811613,38.00874 37.365833,-53.26843 -38.008738,-52.81161 53.268428,37.36583 52.81161,-38.00874 -37.36583,53.26843 z"
transform="matrix(0.45357635,0,0,0.48302392,-5.0551384,-189.42468)" />
<circle
style="fill:none;fill-opacity:1;stroke:#000000;stroke-width:0.5;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
id="path25062"
cx="54.432987"
cy="74.84536"
r="30" />
<circle
style="fill:none;fill-opacity:1;stroke:#000000;stroke-width:0.579683;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
id="circle25206"
cx="54.432987"
cy="74.84536"
r="34.780952" />
</g>
<g
inkscape:label="Layer 1"
inkscape:groupmode="layer"
id="layer1"
style="display:inline"
transform="translate(7.215891,-13.196477)">
<path
sodipodi:type="star"
style="fill:none;stroke:#000000;stroke-width:1.88976;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
id="path846"
inkscape:flatsided="false"
sodipodi:sides="4"
sodipodi:cx="205.73099"
sodipodi:cy="282.8801"
sodipodi:r1="176.15717"
sodipodi:r2="35.231434"
sodipodi:arg1="1.5707963"
sodipodi:arg2="2.3561945"
inkscape:rounded="0"
inkscape:randomized="0"
d="M 205.73099,459.03726 180.8186,307.79248 29.573822,282.8801 180.8186,257.96771 l 24.91238,-151.24478 24.91239,151.24478 151.24478,24.91238 -151.24478,24.91239 z"
transform="scale(0.26458333)" />
<path
style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
d="m 54.432988,28.237108 2e-6,93.216502"
id="path991" />
<path
style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
d="m 7.8247403,74.845359 93.2164997,-3e-6"
id="path993" />
<path
style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
d="M 47.841587,68.253956 C 61.024391,81.436759 61.024391,81.436759 61.024391,81.436759"
id="path995" />
<path
style="fill:#ff0000;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
d="M 61.024391,68.253956 47.841587,81.436759"
id="path997" />
<path
style="fill:#ff0000;stroke:#000000;stroke-width:0.607473;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
d="m 193.43534,269.62014 c -6.2322,-6.23407 -11.33698,-11.55089 -11.34397,-11.81517 -0.007,-0.26428 5.0921,-31.50414 11.33128,-69.4219 l 11.34397,-68.9414 0.0816,40.4123 c 0.0449,22.22675 0.0449,58.56721 0,80.75656 l -0.0816,40.34427 z"
id="path1073"
transform="scale(0.26458333)" />
<path
style="fill:#aa0000;stroke:#000000;stroke-width:0.607473;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
d="m 206.57191,200.26456 c 0.0205,-44.46429 0.0937,-80.62717 0.16276,-80.36197 0.27012,1.03808 22.62323,137.13728 22.62323,137.74386 0,0.42036 -3.98335,4.62794 -11.41164,12.05401 l -11.41164,11.40825 z"
id="path1186"
transform="scale(0.26458333)" />
<path
style="fill:#0000ff;stroke:#000000;stroke-width:0.607473;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
d="m 206.57191,365.49565 -0.0373,-80.84415 11.41164,11.40825 c 7.42829,7.42607 11.41164,11.63365 11.41164,12.05401 0,0.60657 -22.35311,136.70578 -22.62323,137.74386 -0.069,0.2652 -0.14225,-35.89769 -0.16276,-80.36197 z"
id="path1336"
transform="scale(0.26458333)" />
<path
style="fill:#0000aa;fill-opacity:1;stroke:#000000;stroke-width:0.607473;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
d="M 193.41121,377.30741 C 187.17832,339.428 182.08439,308.218 182.09137,307.95187 c 0.007,-0.26613 5.14794,-5.61759 11.42434,-11.89212 l 11.41164,-11.40825 v 80.76379 c 0,44.42008 -0.0413,80.76378 -0.0918,80.76378 -0.0505,0 -5.19144,-30.99224 -11.42433,-68.87166 z"
id="path1412"
transform="scale(0.26458333)" />
<path
style="fill:none;fill-opacity:1;stroke:#000000;stroke-width:0.607473;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
d="m 41.628379,282.04372 c 0.2652,-0.0654 31.724078,-5.25942 69.908621,-11.5423 l 69.42643,-11.4234 11.57959,11.57959 11.57958,11.57958 -81.4882,-0.0373 c -44.818513,-0.0205 -81.271221,-0.0908 -81.006021,-0.15619 z"
id="path2360"
transform="scale(0.26458333)" />
<path
style="fill:#000000;fill-opacity:1;stroke:#000000;stroke-width:0.607473;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
d="m 111.38404,295.24525 c -37.746813,-6.24278 -68.992206,-11.41247 -69.434206,-11.48821 -0.442001,-0.0757 35.865552,-0.15937 80.683446,-0.18586 l 81.48708,-0.0482 -11.56902,11.57237 c -6.36296,6.3648 -11.78675,11.55617 -12.05287,11.53638 -0.26612,-0.0198 -31.36762,-5.14373 -69.11443,-11.38651 z"
id="path2436"
transform="scale(0.26458333)" />
<path
style="fill:#000000;fill-opacity:1;stroke:#000000;stroke-width:0.607473;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
d="m 218.92415,270.65241 11.58478,-11.58478 69.42124,11.42566 c 38.18168,6.28411 69.63822,11.48048 69.90342,11.54749 0.2652,0.067 -36.18751,0.13862 -81.00602,0.15913 l -81.4882,0.0373 z"
id="path2475"
transform="scale(0.26458333)" />
<path
style="fill:none;fill-opacity:1;stroke:#000000;stroke-width:0.607473;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
d="m 218.91063,295.09538 -11.56902,-11.57237 81.48708,0.0373 c 44.81789,0.0205 81.2701,0.0921 81.0049,0.15913 -0.42568,0.10756 -139.03687,22.94832 -139.26393,22.94832 -0.0495,0 -5.29607,-5.20757 -11.65903,-11.57237 z"
id="path2514"
transform="scale(0.26458333)" />
<path
style="fill:#ffffff;fill-opacity:1;stroke:none;stroke-width:1.21495;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
d="m 51.111292,281.19388 c 0.5304,-0.13818 29.895283,-5.01467 65.255298,-10.83664 l 64.29093,-10.5854 10.92713,10.91122 10.92713,10.91123 -76.18242,-0.0746 c -41.900341,-0.041 -75.748469,-0.18764 -75.218068,-0.32583 z"
id="path2999"
transform="scale(0.26458333)" />
<path
style="fill:#ffffff;fill-opacity:1;stroke:none;stroke-width:1.21495;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
d="m 219.88208,295.10818 -10.92236,-10.94226 76.17766,0.0508 c 41.89771,0.0279 75.88835,0.15784 75.53475,0.28872 -0.3536,0.13088 -28.99521,4.88871 -63.64802,10.57296 -34.65281,5.68424 -63.72839,10.47833 -64.61239,10.65353 -1.3859,0.27467 -3.11163,-1.18855 -12.52964,-10.62371 z"
id="path3075"
transform="scale(0.26458333)" />
<text
xml:space="preserve"
style="font-style:normal;font-weight:normal;font-size:10.5833px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.264583"
x="48.989689"
y="16.670103"
id="text6475"><tspan
sodipodi:role="line"
id="tspan6473"
style="stroke-width:0.264583"
x="48.989689"
y="16.670103"></tspan></text>
<text
xml:space="preserve"
style="font-style:normal;font-weight:normal;font-size:10.5833px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.264583"
x="50.474586"
y="25.95421"
id="text29322"><tspan
sodipodi:role="line"
id="tspan29320"
style="stroke-width:0.264583"
x="50.474586"
y="25.95421">N</tspan></text>
<text
xml:space="preserve"
style="font-style:normal;font-weight:normal;font-size:10.5833px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.264583"
x="51.019772"
y="131.41812"
id="text33982"><tspan
sodipodi:role="line"
id="tspan33980"
style="stroke-width:0.264583"
x="51.019772"
y="131.41812">S</tspan></text>
<text
xml:space="preserve"
style="font-style:normal;font-weight:normal;font-size:10.5833px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.264583"
x="104.54184"
y="78.702988"
id="text37802"><tspan
sodipodi:role="line"
id="tspan37800"
style="stroke-width:0.264583"
x="104.54184"
y="78.702988">E</tspan></text>
<text
xml:space="preserve"
style="font-style:normal;font-weight:normal;font-size:10.5833px;line-height:1.25;font-family:sans-serif;fill:#000000;fill-opacity:1;stroke:none;stroke-width:0.264583"
x="-4.1540327"
y="78.702988"
id="text39852"><tspan
sodipodi:role="line"
id="tspan39850"
style="stroke-width:0.264583"
x="-4.1540327"
y="78.702988">W</tspan></text>
</g>
</svg>
Side by Side

Before

Width:  |  Height:  |  Size: 11 KiB

local/recipes/qt/qt6-sensors/source/examples/sensors/sensorsshowcase/images/magnet.svg
-98
View File
@@ -1,98 +0,0 @@
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<!-- Created with Inkscape (http://www.inkscape.org/) -->
<svg
width="152.6804mm"
height="186.70102mm"
viewBox="0 0 152.6804 186.70102"
version="1.1"
id="svg22292"
sodipodi:docname="magnet.svg"
inkscape:version="1.1.1 (3bf5ae0d25, 2021-09-20)"
xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
xmlns="http://www.w3.org/2000/svg"
xmlns:svg="http://www.w3.org/2000/svg">
<sodipodi:namedview
id="namedview22294"
pagecolor="#ffffff"
bordercolor="#666666"
borderopacity="1.0"
inkscape:pageshadow="2"
inkscape:pageopacity="0.0"
inkscape:pagecheckerboard="0"
inkscape:document-units="mm"
showgrid="false"
inkscape:zoom="3.1108586"
inkscape:cx="384.62051"
inkscape:cy="214.24953"
inkscape:window-width="2560"
inkscape:window-height="1377"
inkscape:window-x="1912"
inkscape:window-y="72"
inkscape:window-maximized="1"
inkscape:current-layer="layer1" />
<defs
id="defs22289" />
<g
inkscape:label="Layer 1"
inkscape:groupmode="layer"
id="layer1"
transform="translate(0.34020391,-51.711357)">
<path
style="fill:none;stroke:#0000ff;stroke-width:40;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
id="path22661"
sodipodi:type="arc"
sodipodi:cx="76.206184"
sodipodi:cy="162.27835"
sodipodi:rx="56.134018"
sodipodi:ry="56.134018"
sodipodi:start="1.5707963"
sodipodi:end="3.1415927"
sodipodi:arc-type="arc"
d="M 76.206184,218.41237 A 56.134018,56.134018 0 0 1 36.513439,201.9711 56.134018,56.134018 0 0 1 20.072166,162.27835"
sodipodi:open="true" />
<rect
style="fill:#cccccc;fill-opacity:1;stroke:none;stroke-width:0.814709;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
id="rect22976"
width="39.829895"
height="50.35051"
x="0.17010537"
y="51.711357" />
<path
style="fill:#ff0000;stroke:#ff0000;stroke-width:40;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
id="path23734"
sodipodi:type="arc"
sodipodi:cx="-76.206184"
sodipodi:cy="162.27835"
sodipodi:rx="56.134018"
sodipodi:ry="56.134018"
sodipodi:start="1.5707963"
sodipodi:end="3.1415927"
sodipodi:arc-type="arc"
d="M -76.206184,218.41237 A 56.134018,56.134018 0 0 1 -115.89893,201.9711 56.134018,56.134018 0 0 1 -132.3402,162.27835"
sodipodi:open="true"
transform="scale(-1,1)" />
<rect
style="fill:#cccccc;fill-opacity:1;stroke:none;stroke-width:0.816447;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
id="rect24456"
width="40"
height="50.35051"
x="112.26804"
y="51.711357" />
<rect
style="fill:#ff0000;fill-opacity:1;stroke:none;stroke-width:1.00283;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
id="rect24480"
width="40"
height="60.340206"
x="112.26804"
y="102.06187" />
<rect
style="fill:#0000ff;fill-opacity:1;stroke:none;stroke-width:1.00563;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
id="rect24580"
width="39.829895"
height="60.93557"
x="0.17010537"
y="102.06187" />
</g>
</svg>
Side by Side

Before

Width:  |  Height:  |  Size: 3.4 KiB

local/recipes/qt/qt6-sensors/source/examples/sensors/sensorsshowcase/images/qt_logo.png
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 14 KiB

local/recipes/qt/qt6-sensors/source/examples/sensors/sensorsshowcase/main.cpp
-18
View File
@@ -1,18 +0,0 @@
// Copyright (C) 2023 The Qt Company Ltd.
// SPDX-License-Identifier: LicenseRef-Qt-Commercial OR BSD-3-Clause
#include <QGuiApplication>
#include <QQmlApplicationEngine>
int main(int argc, char *argv[])
{
QGuiApplication app(argc,argv);
QGuiApplication::setOrganizationName("QtProject");
QGuiApplication::setApplicationName("Sensors Showcase");
QQmlApplicationEngine engine;
engine.loadFromModule("SensorShowcaseModule", "Main");
if (engine.rootObjects().isEmpty())
return -1;
return app.exec();
}
local/recipes/qt/qt6-sensors/source/examples/sensors/sensorsshowcase/qmldir
-9
View File
@@ -1,9 +0,0 @@
module SensorShowcaseModule
prefer :/qt/qml/SensorShowcaseModule/
Main 1.0 Main.qml
Accelerometer 1.0 Accelerometer.qml
Compass 1.0 Compass.qml
Gyroscope 1.0 Gyroscope.qml
Magnetometer 1.0 Magnetometer.qml
Proximity 1.0 Proximity.qml
ProgressXYZBar 1.0 ProgressXYZBar.qml

Some files were not shown because too many files have changed in this diff Show More