RedBear-OS/recipes/core/base-initfs/recipe.toml

[source]
same_as = "../base"

[package]
version = "0.3.1"

[build]
template = "custom"
dependencies = [
  "redoxfs",
  "driver-manager",
  # userutils provides `getty`, copied into the bare initfs from the
  # sysroot below. Without this dependency getty is absent from the
  # sysroot at cook time, the copy is silently skipped, and the bare
  # ISO has no login (init fails to exec /scheme/initfs/bin/getty).
  "userutils",
]
script = """
set -eo pipefail

BINS=(
    init
    logd
    ramfs
    randd
    zerod

    acpid
    fbbootlogd
    fbcond
    hwd
    inputd
    lived
    nvmed
    pcid
    pcid-spawner
    rtcd
    vesad
)

virt_bins()
{
    BINS+=(virtio-blkd virtio-gpud)
}

x86_common_bins()
{
    BINS+=(ahcid ided ps2d usbhidd usbscsid usbhubd xhcid vesad e1000d rtl8168d)
    virt_bins
}

aarch64_bins()
{
    case "${BOARD}" in
        raspi3b*)
            BINS+=(bcm2835-sdhcid)
        ;;
        *)
        #qemu-virt
            virt_bins
        ;;
    esac
}

bare_initfs()
{
    # Per user directive, the bare initfs ships the FULL driver set —
    # identical to the standard x86 initfs (pcid, pcid-spawner, ahcid, ided,
    # nvmed, virtio-*, ps2d, usb*, e1000d, rtl8168d, acpid, hwd, rtcd, lived)
    # plus the framebuffer console stack (inputd, vesad, fbcond, fbbootlogd).
    # Every driver initialises at boot and redoxfs can find/mount a real disk.
    #
    # The interactive login is NOT run from the initfs: after the initfs
    # brings up the drivers + framebuffer console it switchroots to /usr,
    # where the rootfs config (config/minimal.toml, included by redbear-bare)
    # provides 00_ptyd.service + 29_activate_console + 30_console.service
    # (getty -> login -> zsh) with a real /etc/passwd and shell. So the bare
    # initfs matches the mainline initfs exactly — no getty/login/ptyd here.
    x86_common_bins
}

case "${TARGET}" in
    i586-unknown-redox | i686-unknown-redox)
        x86_common_bins
        ;;
    x86_64-unknown-redox)
        if [ "${REDBEAR_BARE_INITFS:-0}" = "1" ]; then
            bare_initfs
        else
            x86_common_bins
        fi
        ;;
    aarch64-unknown-redox)
        aarch64_bins
        ;;
    *)
        ;;
esac

rm -rf "${COOKBOOK_BUILD}/initfs"
mkdir -p "${COOKBOOK_BUILD}/initfs/lib/init.d"

# The bare initfs now uses the full mainline unit graph (all driver +
# console + rootfs units). The interactive login runs from /usr after
# switchroot (see bare_initfs() above), so no initfs-specific getty/ptyd
# units are injected — bare and non-bare copy the identical unit set.
cp "${COOKBOOK_SOURCE}/init.initfs.d"/* "${COOKBOOK_BUILD}/initfs/lib/init.d/"

mkdir -pv "${COOKBOOK_BUILD}/initfs/lib/drivers.d"
cp -v "${COOKBOOK_SOURCE}/drivers/initfs-storage.toml" "${COOKBOOK_BUILD}/initfs/lib/drivers.d/00-storage.toml"
mkdir -pv "${COOKBOOK_BUILD}/initfs/lib/pcid.d"
cp -v "${COOKBOOK_SOURCE}/drivers/initfs-pcid-storage.toml" "${COOKBOOK_BUILD}/initfs/lib/pcid.d/00-storage.toml"

export CARGO_PROFILE_RELEASE_OPT_LEVEL=s
export CARGO_PROFILE_RELEASE_PANIC=abort
rm -rf "${CARGO_TARGET_DIR}"
"${COOKBOOK_CARGO}" build ${build_flags} \
    --manifest-path "${COOKBOOK_SOURCE}/Cargo.toml" \
    $(for bin in "${BINS[@]}"; do echo "-p" "${bin}"; done)

mkdir -pv "${COOKBOOK_BUILD}/initfs/bin" "${COOKBOOK_BUILD}/initfs/lib/drivers"
for bin in "${BINS[@]}"
do
    case "${bin}" in
      init | logd | ramfs | randd | zerod | pcid | pcid-spawner | fbbootlogd | fbcond | inputd | vesad | lived | ps2d | acpid | bcm2835-sdhcid | rtcd | hwd | ptyd | getty)
        cp -v "target/${TARGET}/${build_type}/${bin}" "${COOKBOOK_BUILD}/initfs/bin"
        ;;
      *)
        cp -v "target/${TARGET}/${build_type}/${bin}" "${COOKBOOK_BUILD}/initfs/lib/drivers"
        ;;
    esac
done

cp "${COOKBOOK_SYSROOT}/usr/bin/redoxfs" "${COOKBOOK_BUILD}/initfs/bin"
# ion removed: it was only a bundled initfs recovery shell (nothing execs it);
# not worth holding nix back on old 0.23.1. The interactive login runs from
# /usr (brush) after switchroot.
cp "${COOKBOOK_SYSROOT}/usr/bin/driver-manager" "${COOKBOOK_BUILD}/initfs/bin"
# NB: getty/login are intentionally NOT copied into the initfs. The
# interactive login runs from /usr after switchroot (config/minimal.toml's
# 30_console.service), where a real /etc/passwd, login and shell exist.

ARCH="$(echo "${GNU_TARGET}" | cut -d - -f1)"
RUSTFLAGS="$RUSTFLAGS -Ctarget-feature=+crt-static -Clink-arg=-nostartfiles -Clink-arg=-nostdlib" cargo \
    -Zbuild-std=core,alloc,compiler_builtins \
    -Zbuild-std-features=compiler-builtins-mem build \
    --target "${TARGET}" \
    --manifest-path "${COOKBOOK_SOURCE}/bootstrap/Cargo.toml" \
    --release \
    --target-dir "${COOKBOOK_BUILD}"

if [ -f "${COOKBOOK_BUILD}/${TARGET}/release/libbootstrap.a" ]; then
    "${GNU_TARGET}-ld" \
        -o "${COOKBOOK_BUILD}/bootstrap" \
        -nostdlib \
        --gc-sections \
        -T "${COOKBOOK_SOURCE}/bootstrap/src/${ARCH}.ld" \
        -z max-page-size=4096 \
        "${COOKBOOK_BUILD}/${TARGET}/release/libbootstrap.a"
else
    cp -v "${COOKBOOK_BUILD}/${TARGET}/release/bootstrap" "${COOKBOOK_BUILD}/bootstrap"
fi

# Build the loop_mnt discovery helper as a separate target so the
# initfs can fall back to scanning for the live medium at runtime
# (analogous to CachyOS's archiso_loop_mnt hook). Cross-compile
# directly so we don't need a runtime libstd.
CARGO_PROFILE_RELEASE_OPT_LEVEL=s CARGO_PROFILE_RELEASE_PANIC=abort \
"${COOKBOOK_CARGO}" build ${build_flags} \
    --manifest-path "${COOKBOOK_SOURCE}/initfs/tools/Cargo.toml" \
    --target "${TARGET}" \
    --bin loop_mnt
cp -v "target/${TARGET}/${build_type}/loop_mnt" "${COOKBOOK_BUILD}/initfs/bin/loop_mnt"

env -u CARGO -u RUSTFLAGS cargo run --manifest-path "${COOKBOOK_SOURCE}/initfs/tools/Cargo.toml" --bin redox-initfs-ar -- "${COOKBOOK_BUILD}/initfs" "${COOKBOOK_BUILD}/bootstrap" -o "${COOKBOOK_BUILD}/initfs.img"

mkdir -pv "${COOKBOOK_STAGE}/usr/lib/boot"
cp "${COOKBOOK_BUILD}/initfs.img" "${COOKBOOK_STAGE}/usr/lib/boot/initfs"
"""