First P3 hub-driver maturity improvements, cross-referenced with
Linux 7.1 drivers/usb/core/hub.c:
1. Power-on timing (hub_power_on + hub_power_on_good_delay)
- reads bPwrOn2PwrGood (V2: power_on_good; V3: default 10)
- sleeps power_on_good * 2ms after SET_FEATURE(PORT_POWER)
- minimum floor: 100ms (matches Linux hub_power_on_good_delay)
- logs the computed delay at startup
2. USB 3 hub stall fix
- ConfigureEndpointsReq no longer passes interface_desc or
alternate_setting for USB 3 hubs
- xHCI handles default-alt-0 derivation internally
- resolves the two TODOs that documented the stall symptom
3. SET_HUB_DEPTH with hub_depth() value
- previously passed port_id.hub_depth().into() which was
incorrect (returned route-string-derived depth)
- now logs the depth value explicitly
4. Polling interval tightened 1s -> 250ms
- interrupt-driven detection remains a follow-up (P3 slice 2)
- 250ms is a reasonable intermediate step for USB keyboard
responsiveness
5. wHubDelay recorded from V3 descriptor
- extracted from hub_desc.delay field
- displayed at startup; future P3 slices will accumulate
through the hub tree per Linux hub_configure()
Cross-reference: Linux 7.1
- drivers/usb/core/hub.c: hub_power_on()
- drivers/usb/core/hub.c: hub_power_on_good_delay()
- drivers/usb/core/hub.c: hub_activate()
- include/linux/usb/ch11.h: HUB_SET_DEPTH = 0x0C
Red Bear OS
b244dbd0d9