restore lost packages from 0.2.3 + fix overwritten 0.2.4 files

- Restore 29 recipe symlinks (libdrm, qtbase, dbus, sddm, pipewire, etc.)
- Restore 33 patches (KDE, libdrm, mesa, pipewire, sddm, wireplumber)
- Restore 20+ local/scripts (audit, lint, test, build helpers)
- Restore src/cook/scheduler.rs, status.rs, gnu-config/
- Restore scripts/patch-inclusion-gate.sh, run_mini1.sh, validate-collision-log.sh
- Recover TLC source from HEAD (was overwritten by 0.2.3 checkout)
- Recover 11 local/docs plans from HEAD (were overwritten)
- Recover qt6-wayland-smoke symlink from HEAD
- Fix MOTD: remove garbled ASCII art, use clean text
- Update version: 0.2.0 -> 0.2.4 in os-release, motd, config
- Reduce filesystem_size: 1536 -> 512 MiB
- Add ABSOLUTE RULE to AGENTS.md: never delete/ignore packages
- Reduce pcid scheme log verbosity: info -> debug

local/recipes/gpu/amdgpu-source/include/linux/reset/bcm63xx_pmb.h

@@ -0,0 +1,80 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Broadcom BCM63xx Processor Monitor Bus shared routines (SMP and reset)
+ *
+ * Copyright (C) 2015, Broadcom Corporation
+ * Author: Florian Fainelli <f.fainelli@gmail.com>
+ */
+#ifndef __BCM63XX_PMB_H
+#define __BCM63XX_PMB_H
+
+#include <linux/io.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+
+/* PMB Master controller register */
+#define PMB_CTRL		0x00
+#define  PMC_PMBM_START		(1 << 31)
+#define  PMC_PMBM_TIMEOUT	(1 << 30)
+#define  PMC_PMBM_SLAVE_ERR	(1 << 29)
+#define  PMC_PMBM_BUSY		(1 << 28)
+#define  PMC_PMBM_READ		(0 << 20)
+#define  PMC_PMBM_WRITE		(1 << 20)
+#define PMB_WR_DATA		0x04
+#define PMB_TIMEOUT		0x08
+#define PMB_RD_DATA		0x0C
+
+#define PMB_BUS_ID_SHIFT	8
+
+/* Perform the low-level PMB master operation, shared between reads and
+ * writes.
+ */
+static inline int __bpcm_do_op(void __iomem *master, unsigned int addr,
+			       u32 off, u32 op)
+{
+	unsigned int timeout = 1000;
+	u32 cmd;
+
+	cmd = (PMC_PMBM_START | op | (addr & 0xff) << 12 | off);
+	writel(cmd, master + PMB_CTRL);
+	do {
+		cmd = readl(master + PMB_CTRL);
+		if (!(cmd & PMC_PMBM_START))
+			return 0;
+
+		if (cmd & PMC_PMBM_SLAVE_ERR)
+			return -EIO;
+
+		if (cmd & PMC_PMBM_TIMEOUT)
+			return -ETIMEDOUT;
+
+		udelay(1);
+	} while (timeout-- > 0);
+
+	return -ETIMEDOUT;
+}
+
+static inline int bpcm_rd(void __iomem *master, unsigned int addr,
+			  u32 off, u32 *val)
+{
+	int ret = 0;
+
+	ret = __bpcm_do_op(master, addr, off >> 2, PMC_PMBM_READ);
+	*val = readl(master + PMB_RD_DATA);
+
+	return ret;
+}
+
+static inline int bpcm_wr(void __iomem *master, unsigned int addr,
+			  u32 off, u32 val)
+{
+	int ret = 0;
+
+	writel(val, master + PMB_WR_DATA);
+	ret = __bpcm_do_op(master, addr, off >> 2, PMC_PMBM_WRITE);
+
+	return ret;
+}
+
+#endif /* __BCM63XX_PMB_H */

local/recipes/gpu/amdgpu-source/include/linux/reset/reset-simple.h

@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Simple Reset Controller ops
+ *
+ * Based on Allwinner SoCs Reset Controller driver
+ *
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ */
+
+#ifndef __RESET_SIMPLE_H__
+#define __RESET_SIMPLE_H__
+
+#include <linux/io.h>
+#include <linux/reset-controller.h>
+#include <linux/spinlock.h>
+
+/**
+ * struct reset_simple_data - driver data for simple reset controllers
+ * @lock: spinlock to protect registers during read-modify-write cycles
+ * @membase: memory mapped I/O register range
+ * @rcdev: reset controller device base structure
+ * @active_low: if true, bits are cleared to assert the reset. Otherwise, bits
+ *              are set to assert the reset. Note that this says nothing about
+ *              the voltage level of the actual reset line.
+ * @status_active_low: if true, bits read back as cleared while the reset is
+ *                     asserted. Otherwise, bits read back as set while the
+ *                     reset is asserted.
+ * @reset_us: Minimum delay in microseconds needed that needs to be
+ *            waited for between an assert and a deassert to reset the
+ *            device. If multiple consumers with different delay
+ *            requirements are connected to this controller, it must
+ *            be the largest minimum delay. 0 means that such a delay is
+ *            unknown and the reset operation is unsupported.
+ */
+struct reset_simple_data {
+	spinlock_t			lock;
+	void __iomem			*membase;
+	struct reset_controller_dev	rcdev;
+	bool				active_low;
+	bool				status_active_low;
+	unsigned int			reset_us;
+};
+
+extern const struct reset_control_ops reset_simple_ops;
+
+#endif /* __RESET_SIMPLE_H__ */

local/recipes/gpu/amdgpu-source/include/linux/reset/socfpga.h

@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __LINUX_RESET_SOCFPGA_H__
+#define __LINUX_RESET_SOCFPGA_H__
+
+void __init socfpga_reset_init(void);
+
+#endif /* __LINUX_RESET_SOCFPGA_H__ */

local/recipes/gpu/amdgpu-source/include/linux/reset/sunxi.h

@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __LINUX_RESET_SUNXI_H__
+#define __LINUX_RESET_SUNXI_H__
+
+void __init sun6i_reset_init(void);
+
+#endif /* __LINUX_RESET_SUNXI_H__ */